Discussion
Home ‣ Chemical Engineering ‣ Refractory Technology Comments
- Question
Thoria is an expensive refractory material and is radioactive in nature. Thorium oxide is used in the manufacture of
Options- A. segar cones.
- B. muffles for muffle furnaces.
- C. insulating bricks.
- D. crucibles used for melting of high purity metals.
- Correct Answer
- crucibles used for melting of high purity metals.
- 1. Tarapur atomic power station
Options- A. has two boiling water reactors of American design.
- B. has an installed capacity of 400 MW.
- C. is the first power reactor in India, which became critical in 1969.
- D. all (a), (b) and (c). Discuss
- 2. The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump.
Options- A. electromagnetic
- B. reciprocating
- C. centrifugal
- D. volute Discuss
- 3. Which one is the radioactive isotope of hydrogen?
Options- A. Deuterium
- B. Ortho-hydrogen
- C. Tritium
- D. None of these Discuss
- 4. The amount of a radioactive material (having a half life of 100 years) remaining after 400 years will be __________ of its original weight.
Options- A. 1/2
- B. 1/4
- C. 1/8
- D. 1/16 Discuss
- 5. Research reactors are normally meant for
Options- A. producing high neutron flux 1012-1013 neutrons/cm2, sec and studying the effect of neutron bombardment on dif ferent materials.
- B. accelerating the neutrons.
- C. power generation.
- D. none of these Discuss
- 6. Refractoriness of a typical silica brick corresponds to Segar cone number, '32', which is equivalent to a temperature of __________ °C.
Options- A. 1380
- B. 1520
- C. 1710
- D. 1915 Discuss
- 7. Chemically, mullite refractories is
Options- A. 3Al2O3.2SiO2
- B. Al2O3
- C. ZrSO4
- D. ThO2 Discuss
- 8. Which is the stable form of silica below 870°C?
Options- A. Tridymite
- B. Cristobalite
- C. Quartz
- D. None of these Discuss
- 9. Firing of refractory brick is done to
Options- A. dehydrate the dried refractory.
- B. develop stable mineral forms in them.
- C. form ceramic bonds necessary for development of high crushing strength in the finished product.
- D. all (a), (b) and (c). Discuss
- 10. Maximum alumina content in high alumina refractory can be as high as __________ percent.
Options- A. 30
- B. 50
- C. 70
- D. 90 Discuss
Refractory Technology problems
Search Results
Correct Answer: all (a), (b) and (c).
Correct Answer: electromagnetic
Correct Answer: Tritium
Correct Answer: 1/16
Correct Answer: producing high neutron flux 1012-1013 neutrons/cm2, sec and studying the effect of neutron bombardment on dif ferent materials.
Correct Answer: 1710
Correct Answer: 3Al2O3.2SiO2
Correct Answer: Quartz
Correct Answer: all (a), (b) and (c).
Correct Answer: 90
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.