Discussion
Home ‣ Chemical Engineering ‣ Mass Transfer Comments
- Question
In distillation columns, the number of bubble caps per tray primarily depends upon the
Options- A. allowable liquid velocity.
- B. allowable gas velocity.
- C. allowable gas and liquid velocities.
- D. feed composition.
- Correct Answer
- allowable gas and liquid velocities.
- 1. The term "cooling range" in a cooling tower refers to the difference in the temperature of
Options- A. cold water leaving the tower and the wet bulb temperature of the surrounding air.
- B. hot water entering the tower and the wet bulb temperature of the surrounding air.
- C. hot water entering the tower and the cooled water leaving the tower.
- D. none of these Discuss
- 2. To increase the absorption factor, (where, G = gas flow rate, S = solvent flow rate)
Options- A. increase both 'G' and 'S'.
- B. decrease both 'G' and 'S'.
- C. increase 'S' and decrease 'G'.
- D. increase 'G' and decrease 'S' Discuss
- 3. Dew point of a gas-vapour mixture
Options- A. increases with temperature rise.
- B. decreases with temperature rise.
- C. decreases with decrease in pressure.
- D. increases with increase in pressure. Discuss
- 4. Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a
Options- A. higher dew point.
- B. higher absolute (specific) humidity.
- C. higher relative humidity
- D. higher wet bulb temperature. Discuss
- 5. Which of the following remains constant during sensible cooling process?
Options- A. Specific humidity
- B. Partial pressure of vapour
- C. Both (a) and (b)
- D. Neither (a) nor (b) Discuss
- 6. The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are same for, NPr = NSc = __________
Options- A. 1
- B. 0.5
- C. 10
- D. 0 Discuss
- 7. The difference of wet bulb temperature and adiabatic saturation temperature of unsaturated mixture of any system is
Options- A. +ve
- B. -ve
- C. zero
- D. none of these Discuss
- 8. Absorption factor is defined as (where, S1 = slope of the operating line S2 = slope of the equilibrium curve)
Options- A. S2/S1
- B. S1/S2
- C. S1 - S2
- D. S1 x S2 Discuss
- 9. Fenske's equation for determining the minimum number of theoretical stages in distillation column holds good, when the
Options- A. relative volatility is reasonably constant.
- B. mixture (to be separated) shows negative deviation from ideality.
- C. mixture (to be separated) shows positive deviation from ideality.
- D. multicomponent distillation is involved. Discuss
- 10. Which of the following is the most suitable for extraction in a system having very low density difference?
Options- A. Mixer-settler extractor
- B. Centrifugal extractor
- C. Pulsed extractor
- D. Packed extraction tower Discuss
Mass Transfer problems
Search Results
Correct Answer: hot water entering the tower and the cooled water leaving the tower.
Correct Answer: increase 'S' and decrease 'G'.
Correct Answer: decreases with decrease in pressure.
Correct Answer: higher relative humidity
Correct Answer: Both (a) and (b)
Correct Answer: 1
Correct Answer: +ve
Correct Answer: S1/S2
Correct Answer: relative volatility is reasonably constant.
Correct Answer: Centrifugal extractor
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.