Discussion
Home ‣ Chemical Engineering ‣ Chemical Engineering Basics Comments
- Question
An alloy of Fe - 0.4 % C is
Options- A. cast iron.
- B. hypo-eutectoid steel.
- C. hyper-eutectoid steel.
- D. eutectoid steel
- Correct Answer
- hypo-eutectoid steel.
- 1. Annealing ofwhite cast iron produces __________ iron.
Options- A. grey
- B. nodular
- C. malleable
- D. spheroidal Discuss
- 2. Nusselt number is related to Grashoff number (Gr) in turbulent & laminar flow respectively, in respect of free convection over a vertical flat plate as
Options- A. Gr0.25, Gr
- B. Gr0.25, Gr0.33
- C. Gr, Gr0.25
- D. Gr0.33, Gr0.25 Discuss
- 3. Corrosion of metals can not be prevented by its
Options- A. tempering
- B. chromising
- C. aluminising
- D. alloying Discuss
- 4. Evaporative cooling process employs a combination of cooling and humidification in which the
Options- A. sensible heat is added.
- B. sensible heat is removed and the latent heat is added.
- C. latent heat is removed.
- D. sensible heat is added and latent heat is removed. Discuss
- 5. Maxwell's thermodynamic relations applies to the
Options- A. chemical systems in equilibrium.
- B. mechanical systems in equilibrium.
- C. irreversible thermodynamic processes.
- D. reversible thermodynamic processes. Discuss
- 6. Auto collimator is used to check
Options- A. flatness
- B. angle
- C. rotor balancing
- D. roughness Discuss
- 7. All of the following alloying elements of steel increases hardness but sacrifice ductility, except
Options- A. nickel
- B. vanadium
- C. molybdenum
- D. chromium Discuss
- 8. In the blast furnace, incorporation of water vapour in the blast gives the following effect.
Options- A. Increases the reducing potential of the gas.
- B. Increases the flame temperature.
- C. No significant change occurs.
- D. Increases the hydrogen content in the metal. Discuss
- 9. Transition from laminar to turbulent zone in free convection heat transfer is governed by the critical value of
Options- A. Grashoff number.
- B. Grashoff number & Reynolds number.
- C. Reynolds number.
- D. Grashoff number & Prandtl number. Discuss
- 10. In extrusion of metals, which of the following statement is true?
Options- A. speed of the extruded material is same as that of ram speed.
- B. Redundant work is a function of the die angle.
- C. Relative motion between the billet surface and the container wall is always present.
- D. Hollow ram is used for indirect extrusion. Discuss
Chemical Engineering Basics problems
Search Results
Correct Answer: malleable
Correct Answer: Gr0.25, Gr
Correct Answer: tempering
Correct Answer: sensible heat is removed and the latent heat is added.
Correct Answer: chemical systems in equilibrium.
Correct Answer: angle
Correct Answer: nickel
Correct Answer: Increases the reducing potential of the gas.
Correct Answer: Grashoff number & Prandtl number.
Correct Answer: Hollow ram is used for indirect extrusion.
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.