In Cisco's Unified Wireless Solution, what is the split-MAC architecture?
Options
A. The split-MAC architecture uses MAC addresses to create a forward/filter table and break up collision domains.
B. The split-MAC architecture allows the splitting of 802.11 protocol packets between the AP and the controller to allow processing by both devices.
C. The split-MAC architecture uses MAC addresses on the wireless network and IP addresses on the wired network.
D. The split-MAC architecture uses MAC addresses to create a forward/filter table and break up broadcast domains.
Correct Answer
The split-MAC architecture allows the splitting of 802.11 protocol packets between the AP and the controller to allow processing by both devices.
Explanation
The split-MAC architecture allows the splitting of 802.11 protocol packets between the Cisco LWAPP-based AP, which handles real-time portions of the protocol, and the WLAN controller, which handles those items that are not time sensitive.
Wireless Technologies problems
Search Results
1. What is the maximum data rate for the 802.11g standard?
The IEEE 802.11h standard provides an addition 11 channels to the 802.11a standard's 12 non-overlapping channel for a total of 23 non-overlapping channels.
5. Which of the following are valid ways to refer only to host 172.16.30.55 in an IP access list?
Correct Answer: That you have more than one access point and they are in the same SSID connected by a distribution system.
Explanation:
Extended Service Set ID means that you have more than one access point and they all are set to the same SSID and all are connected together in the same VLAN or distribution system so users can roam.
7. What is the maximum distance with maximum data rate for 802.11g?
The Cisco Unified Wireless Solution is a great product, but you must purchase specialized devices. Cisco managed access points and a controller are the devices you need to purchase to run the Unified Wireless Solution.
10. What is the frequency range of the IEEE 802.11a standard?