Discussion
Home ‣ Mechanical Engineering ‣ Workshop Technology Comments
- Question
Metal patterns are used for
Options- A. small castings
- B. large castings
- C. complicated castings
- D. large scale production of castings
- Correct Answer
- large scale production of castings
- 1. The blank diameter used in thread rolling will be
Options- A. equal to minor diameter of the thread
- B. equal to pitch diameter of the thread
- C. a little larger than the minor diameter of the thread
- D. a little larger than the pitch diameter of the thread Discuss
- 2. The electrodes used in spot welding have a tip of
Options- A. stainless steel
- B. aluminium
- C. copper
- D. brass Discuss
- 3. The two elements of a pair are said to form a __________ when they permit relative motion between them.
Options- A. open pair
- B. kinematic pair Discuss
- 4. The sliding pairs, turning pairs and screw pairs form lower pairs.
Options- A. True
- B. False Discuss
- 5. A pair of friction discs is an example of rolling pair.
Options- A. True
- B. False Discuss
- 6. The draft or taper allowance on casting is generally
Options- A. 1 to 2 mm/m
- B. 2 to 5 mm/m
- C. 5 to 10 mm/m
- D. 10 to 15 mm/m Discuss
- 7. A taper provided on the pattern for its easy and clean withdrawl from the mould is known as
Options- A. machining allowance
- B. draft allowance
- C. shrinkage allowance
- D. distortion allowance Discuss
- 8. The centrifugal casting method, is used for casting articles of
Options- A. symmetrical shape about vertical axis
- B. symmetrical shape about horizontal axis
- C. irregular shape
- D. non-ferrous metal only Discuss
- 9. In a bilateral system of tolerance, the tolerance is allowed on
Options- A. one side of the actual size
- B. one side of the nominal size
- C. both sides of the actual size
- D. both sides of the nominal size Discuss
- 10. In a centrifugal casting method
Options- A. core is made of sand
- B. core is made of ferrous metal
- C. core is made of non-ferrous metal
- D. no core is used Discuss
Workshop Technology problems
Search Results
Correct Answer: a little larger than the minor diameter of the thread
Correct Answer: copper
Correct Answer: kinematic pair
Correct Answer: True
Correct Answer: False
Correct Answer: 1 to 2 mm/m
Correct Answer: draft allowance
Correct Answer: symmetrical shape about horizontal axis
Correct Answer: both sides of the nominal size
Correct Answer: no core is used
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.