logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Engineering Materials See What Others Are Saying!
  • Question
  • Brass is an alloy of


  • Options
  • A. copper and zinc
  • B. copper and tin
  • C. copper, tin and zinc
  • D. none of these

  • Correct Answer
  • copper and zinc 


  • More questions

    • 1. The form grinding is used to grind gear teeth, threads, splined shafts and holes.

    • Options
    • A. Correct
    • B. Incorrect
    • Discuss
    • 2. The atomic mass of an element is the number of times the atom of that element is heavier than the hydrogen atom.

    • Options
    • A. True
    • B. False
    • Discuss
    • 3. When the air is passed through an insulated chamber having sprays of water maintained at a temperature higher than the dew point temperature of entering air but lower than its dry bulb temperature, then the air is said to be

    • Options
    • A. cooled and humidified
    • B. cooled and dehumidified
    • C. heated and humidified
    • D. heated and dehumidified
    • Discuss
    • 4. In centreless grinding, work place centre will be

    • Options
    • A. above the line joining the two wheel centres
    • B. below the line joining the two wheel centres
    • C. on the line joining the two wheel centres
    • D. at the intersection of the line joining the wheel centres with the work place plane
    • Discuss
    • 5. An infinite parallel planes with emissivities e1 and e2, the interchange factor for radiation from surface 1 to surface 2 is given by

    • Options
    • A.
    • B.
    • C. e1 + e2
    • D. e1e2
    • Discuss
    • 6. The horizontal thrust offered by the retaining wall on the retained material is (where w = Specific weight of the retained material, h = height of retaining wall, and (?) = Angle of repose of the retained earth)

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 7. A fuel of cetane number 40 has the same ignition quality as a mixture of

    • Options
    • A. 40% cetane and 60% alpha methyl napthalene
    • B. 40% alpha methyl napthalene and 60% cetane
    • C. 40% petrol and 60% diesel
    • D. 40% diesel and 60% petrol
    • Discuss
    • 8. The vacuum pressure is always the negative gauge pressure.

    • Options
    • A. Yes
    • B. No
    • Discuss
    • 9. A double strap butt joint with equal straps is

    • Options
    • A. always in single shear
    • B. always in double shear
    • C. either in single shear or double shear
    • D. none of these
    • Discuss
    • 10. The increase of cooling water temperature in petrol engine will __________ the knocking tendency.

    • Options
    • A. not effect
    • B. decrease
    • C. increase
    • Discuss


    Comments

    There are no comments.

Enter a new Comment