logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Strength of Materials Comments

  • Question
  • Strain energy is the


  • Options
  • A. energy stored in a body when strained within elastic limits
  • B. energy stored in a body when strained upto the breaking of a specimen
  • C. maximum strain energy which can be stored in a body
  • D. proof resilience per unit volume of a material

  • Correct Answer
  • energy stored in a body when strained within elastic limits 


  • Strength of Materials problems


    Search Results


    • 1. When a rectangular beam is loaded transversely, the maximum compressive stress is developed on the

    • Options
    • A. top layer
    • B. bottom layer
    • C. neutral axis
    • D. every cross-section
    • Discuss
    • 2. In order to know whether a column is long or short, we must know its slenderness ratio.

    • Options
    • A. True
    • B. False
    • Discuss
    • 3. Resilience is the

    • Options
    • A. energy stored in a body when strained within elastic limits
    • B. energy stored in a body when strained upto the breaking of the specimen
    • C. maximum strain energy which can be stored in a body
    • D. none of the above
    • Discuss
    • 4. If the tearing efficiency of a riveted joint is 50%, then ratio of rivet hole diameter to the pitch of rivets is

    • Options
    • A. 0.20
    • B. 0.30
    • C. 0.50
    • D. 0.60
    • Discuss
    • 5. The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.

    • Options
    • A. same
    • B. double
    • C. four times
    • D. six times
    • Discuss
    • 6. The bending stress in a beam is __________ section modulus.

    • Options
    • A. directly proportional to
    • B. inversely proportional to
    • Discuss
    • 7. For a beam, as shown in the below figure, when the load W is applied in the centre of the beam, the maximum deflection is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 8. If the slenderness ratio for a column is 100, then it is said to be a __________ column.

    • Options
    • A. long
    • B. medium
    • C. short
    • Discuss
    • 9. A concentrated load is one which

    • Options
    • A. acts at a point on a beam
    • B. spreads non-uniformly over the whole length of a beam
    • C. spreads uniformly over the whole length of a beam
    • D. varies uniformly over the whole length of a beam
    • Discuss
    • 10. If the depth is kept constant for a beam of uniform strength, then its width will vary in proportional to (where M = Bending moment)

    • Options
    • A. M
    • B. M
    • C. M2
    • D. M3
    • Discuss


    Comments

    There are no comments.

Enter a new Comment