Discussion
Home ‣ Mechanical Engineering ‣ IC Engines and Nuclear Power Plants Comments
- Question
The object of supercharging the engine is
Options- A. to reduce mass ofthe engine per brake power
- B. to reduce space occupied by the engine
- C. to increase the power output of an engine when greater power is required
- D. all ofthe above
- Correct Answer
- all ofthe above
- 1. Ordinary water is sometimes used as moderator when enriched uranium is used as a fuel in nuclear power plants.
Options- A. Yes
- B. No Discuss
- 2. In a four stroke cycle petrol engine, the charge is compressed when both the valves (i.e. inlet valve and exit valve) are closed,
Options- A. Agree
- B. Disagree Discuss
- 3. The reference fuels for knock rating of spark ignition engines would include
Options- A. iso-octane and alpha-methyl naphthalene
- B. normal octane and aniline
- C. iso-octane and normal hexane
- D. normal heptane and iso-octane Discuss
- 4. The detonation is also called knocking or pinking.
Options- A. Yes
- B. No Discuss
- 5. The increase of cooling water temperature in petrol engine will __________ the knocking tendency.
Options- A. not effect
- B. decrease
- C. increase Discuss
- 6. The basic requirement of a good combustion chamber is
Options- A. minimum turbulence
- B. low compression ratio
- C. high thermal efficiency and power output
- D. low volumetric efficiency Discuss
- 7. In a diesel engine, the duration between the time of injection and ignition, is known as
Options- A. pre-ignition period
- B. delay period
- C. period of ignition
- D. burning period Discuss
- 8. The injection pressure in a diesel engine is about
Options- A. 10 bar
- B. 100 bar
- C. 150 bar
- D. 500 bar Discuss
- 9. The secondary fuel used in nuclear power plants is
Options- A. U233 and Pu239
- B. U235 and Th232
- C. U235 and Pu238
- D. U233 and Pu238 Discuss
- 10. The detonating tendency in petrol engines increases with increase of compression ratio.
Options- A. True
- B. False Discuss
IC Engines and Nuclear Power Plants problems
Search Results
Correct Answer: Yes
Correct Answer: Agree
Correct Answer: normal heptane and iso-octane
Correct Answer: Yes
Correct Answer: increase
Correct Answer: high thermal efficiency and power output
Correct Answer: delay period
Correct Answer: 100 bar
Correct Answer: U233 and Pu239
Correct Answer: True
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.