logo

CuriousTab

CuriousTab

Discussion

Home ‣ Mechanical Engineering ‣ Hydraulics and Fluid Mechanics See What Others Are Saying!
  • Question

  • The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of pipe, f = Darcy 's coefficient of friction for pipe, and l = Length of pipe )


  • Options
  • A. The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of
  • B. The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of
  • C. The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of
  • D. The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of

  • Correct Answer
  •  

    • More questions

    • 1. Slow speed of the spindle is necessary in

    • Options
    • A. thread cutting
    • B. turning a work of larger diameter
    • C. turning a hard or tough material
    • D. all of these
      • Discuss
    • 2. A zinc diffusion process is called

    • Options
    • A. galvanising
    • B. anodising
    • C. parkerising
    • D. sherardizing
      • Discuss
    • 3. A Pelton wheel develops 1750 kW under a head of 100 metres while running at 200 r.p.m. and discharging 2500 litres of water per second. The unit power of the wheel is

    • Options
    • A. 0.25 kW
    • B. 0.75 kW
    • C. 1.75 kW
    • D. 3.75 kW
      • Discuss
    • 4. A simple turbo-jet engine is basically a gas turbine engine equipped with a propulsive nozzle and diffuser.

    • Options
    • A. Agree
    • B. Disagree
      • Discuss
    • 5. A basic hole is one whose

    • Options
    • A. lower deviation is zero
    • B. upper deviation is zero
    • C. lower and upper deviations are zero
    • D. none of these
      • Discuss
    • 6. The cutting fluid mostly used for machining steel is

    • Options
    • A. water
    • B. soluble oil
    • C. dry
    • D. heavy oils
      • Discuss
    • 7. Which of the following iron exist between 910° C and 1403° C?

    • Options
    • A. ?-iron
    • B. ?-iron
    • C. ?-iron
    • D. ?-iron
      • Discuss
    • 8. The loss of pressure head in case of laminar flow is proportional to

    • Options
    • A. velocity
    • B. (velocity)2
    • C. (velocity)3
    • D. (velocity)4
      • Discuss
    • 9. The refrigerant carbon dioxide is not widely used because of its __________ power require ments per tonne of refrigeration and high operating pressures.

    • Options
    • A. low
    • B. high
      • Discuss
    • 10. Shrinkage allowance is made by adding to external dimensions and subtracting from internal dimensions.

    • Options
    • A. Agree
    • B. Disagree
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.