Discussion
Home ‣ Aptitude ‣ Pipes and Cistern Comments
- Question
Two pipes A and B can fill a tank in 16 hrs and 12 hrs respectively. The capacity of the tank is 240 liters. Both the pipes are opened simultaneously and closed after 2 hrs. How much more water need to fill the tank?
Options- A. 70 lit
- B. 170 lit
- C. 90 lit
- D. 190 lit
- Correct Answer
- 170 lit
ExplanationGiven A alone can fill the tank of capacity 240 lit in 16 hrs.
=> A can fill in 1 hr = 240/16 = 15 lit
=> B alone can fill the tank of capacity 240 lit in 12 hrs.
=> B can fill in 1 hr = 240/12 = 20 lit
Now, (A + B) in 1 hr = 15 + 20 = 35 lit
But they are opened for 2 hrs
=> 2 x 35 = 70 lit rae filled
Remaining water to be filled in tank of 240 lit = 240 - 70 = 170 lit.
- 1. One pipe can fill a tank three times as fast as another pipe. If together the two pipes can fill the tank in 36 min, then the slower alone will be able to fill the tank in:
Options- A. 81 min
- B. 108 min
- C. 144 min
- D. 192 min Discuss
- 2. 12 buckets of water fill a tank when the capacity of each tank is 13.5 liters. How many buckets will be needed to fill the same tank,if the capacity of each bucket is 9 liters?
Options- A. 8
- B. 15
- C. 16
- D. 18 Discuss
- 3. Water flows into a tank which is 200 m long and 150 m wide, through a pipe of cross-section (0.3m x 0.2m) at 20 km/h. In what time will the water level be 12m ?
Options- A. 200 hrs
- B. 240 hrs
- C. 300 hrs
- D. 270 hrs Discuss
- 4. There is an empty reservoir whose capacity is 30 litres. There is an inlet pipe which fills at 5 L/min and there is an outlet pipe which empties at 4 L/min. Both the pipes function alternately for 1 minute. Assuming that the inlet pipe is the first one to function, how much time will it take for the reservoir to be filled up to its capacity?
Options- A. 49.5 min
- B. 50 min
- C. 51 min
- D. 52 min Discuss
- 5. Two pipes can fill a tank in 20 and 24 minutes respectively and a waste pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank is:
Options- A. 60 gallons
- B. 100 gallons
- C. 120 gallons
- D. 180 gallons Discuss
- 6. A large tanker can be filled by two pipes A and B in 60 and 40 minutes respectively. How many minutes will it take to fill the tanker from empty state if B is used for half the time and A and B fill it together for the other half ?
Options- A. 31 min
- B. 29 min
- C. 28 min
- D. 30 min Discuss
- 7. Pipe A is an inlet pipe that can fill an empty cistern in 69 hours. Pipe B can drain the filled cistern in 46hours. When the cistern was filled the two pipes are opened one at a time for an hour each, starting withPipe B. how long will it take for the cistern to be empty?
Options- A. 11 days 10 hours
- B. 11 days 7 hours
- C. 11 days 12 hours
- D. 1 days 13 hours Discuss
- 8. Taps X and Y can fill a tank in 30 and 40 minutes respectively.Tap Z can empty the filled tank in 60 minutes.If all the three taps are kept open for one minute each,how much time will the taps take to fill the tank?
Options- A. 48min
- B. 72min
- C. 24min
- D. None of these Discuss
- 9. The capacity of a tank is 2400 m3 . A pump can be used both for filling and emptying the tank. The emptying capacity of the pump is 10 m3/minute higher than its filling capacity. And also, the pump needs 8 minutes less to empty the tank than to fill it. Find the filling capacity of the pump.
Options- A. 46 cub.m/min
- B. 44 cub.m/min
- C. 48 cub.m/min
- D. 50 cub.m/min Discuss
- 10. Pipe A can fill a tank in 16 minutes and pipe B cam empty it in 24 minutes. If both the pipes are opened together after how many minutes should pipe B be closed, so that the tank is filled in 30 minutes ?
Options- A. 21 min
- B. 24 min
- C. 20 min
- D. 22 min Discuss
Pipes and Cistern problems
Search Results
Correct Answer: 144 min
Explanation:
Let the slower pipe alone fill the tank in x minutes.
Then,faster pipe will fill it in x/3 minutes.
Correct Answer: 18
Explanation:
Capacity of the tank =(12 x 13.5) liters =162 liters.
Capacity of each bucket =9 liters
Number of buckets needed = 162/9 =18.
Correct Answer: 300 hrs
Explanation:
Volume of water collected in the tank in 1 hour
? (0.3 × 0.2 × 20km × 1000mts) = 1200 m cubic
If after t hours, the water is at height of 12m,
1200t=200×150×12
? t = 300 Hours.
Correct Answer: 51 min
Explanation:
The work to be done = Capacity of reservoir = 30 litres.
1st Minute ---> inlet pipe opened ---> 5 lit filled
2nd minute ---> inlet pipe closed; outlet pipe opened ---> 4 lit emptied
In 2 minutes (5 litres - 4 litres = 1lit) is filled into the reservoir.
It takes 2 minutes to fill 1lit ---> it takes 50 minutes to fill 25 litres into the reservoir.
In the 51st minute inlet pipe is opened and the reservoir is filled.
Correct Answer: 120 gallons
Explanation:
Work done by the waste pipe in 1 minute = [-ve sign means emptying]
Volume of part = 3 gallons
Volume of whole = (3 x 40) gallons = 120 gallons.
Correct Answer: 30 min
Explanation:
Part filled by (A + B) in 1 minute = (1/60 + 1/40) = 1/24
Suppose the tank is filled in x minutes.
Then, x/2(1/24 + 1/40) = 1
(x/2) * (1/15) = 1 => x = 30 min.
Correct Answer: 11 days 7 hours
Correct Answer: 24min
Explanation:
Given taps X and Y can fill the tank in 30 and 40 minutes respectively. Therefore,
part filled by tap X in 1 minute = 1/30
part filled by tap Y in 1 minute = 1/40
Tap Z can empty the tank in 60 minutes. Therefore,
part emptied by tap Z in 1 minute = 1/60
Net part filled by Pipes X,Y,Z together in 1 minute = [1/30 +1/40 - 1/60] = 5/120 = 1/24
i.e., the tank can be filled in 24 minutes.
Correct Answer: 50 cub.m/min
Explanation:
Let filling capacity of the pump be 'F'
Then, the filling capacity of the pump will be (F + 10)
From the given data,
Correct Answer: 21 min
Explanation:
Let the pipe B be closed after 'K' minutes.
30/16 - K/24 = 1 => K/24 = 30/16 - 1 = 14/16
=> K = 14/16 x 24 = 21 min.
Comments
There are no comments.More in Aptitude:
Programming
Copyright ©CuriousTab. All rights reserved.