Automation System problems
- 1. The formula for memory capacity is:
Options- A. MC = N/2
- B. MC = 2/N
- C. MC = N squared.
- D. MC -2 to the Nth power
- E. None of the above Discuss
Correct Answer: MC -2 to the Nth power
- 2. The name given to the test that determines whether a machine can think is the:
Options- A. Gaussian test
- B. McCarthy test
- C. Turing test
- D. Boolean test
- E. None of the above Discuss
Correct Answer: Turing test
- 3. Digital signals:
Options- A. can have three possible levels
- B. are assigned values of 1 or 0 depending on the voltage level
- C. have a sinusoidal shape.
- D. have a frequency measured in units of hertz
- E. None of the above Discuss
Correct Answer: are assigned values of 1 or 0 depending on the voltage level
- 4. Flat panel displays are based on what type of technology?
Options- A. Direct view storage tube
- B. Very large-scale integration (VLSI)
- C. Solid state
- D. RGB monitor
- E. None of the above Discuss
Correct Answer: Solid state
- 5. Which of the following symbol modes are used to input of graphics to General CAD system?
Options- A. Live and Rectangle mode
- B. Arc and Circle mode
- C. Dimension and Alphanumeric mode
- D. All of the above
- E. None of the above Discuss
Correct Answer: All of the above
- 6. The program counter:
Options- A. decides which program to run
- B. counts the number of instructions that have been executed
- C. contains the address of the next instruction to be executed
- D. is where arithmetic is done in a computer.
- E. None of the above Discuss
Correct Answer: contains the address of the next instruction to be executed
- 7. What prevents a robotic instrument from running into other objects?
Options- A. negative image
- B. functional manipulators
- C. memory
- D. sensory devices
- E. None of the above Discuss
Correct Answer: sensory devices
- 8. Timing using a TM990 micro¬computer:
Options- A. require an external timer added by the user
- B. is available on the standard CPU board
- C. can be handled in software
- D. both (b) and (c)
- E. None of the above. Discuss
Correct Answer: both (b) and (c)
- 9. A program language:
Options- A. defines the form of the instruction
- B. is always machine dependent
- C. is never machine dependent
- D. All of the above
- E. None of the above Discuss
Correct Answer: defines the form of the instruction
- 10. Which method is frequently used, especially in the early stages of design?
Options- A. The iterative design method
- B. The direct method
- C. The design selection method
- D. All of the above
- E. None of the above Discuss
Correct Answer: The iterative design method
More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.