Discussion
Home ‣ Computer Science ‣ Automation System Comments
- Question
The "walk-through" method of programming a robot involves:
Options- A. walking through your suggested procedure with your supervisor prior to programming
- B. physically moving the robot through all the motions it is to repeat
- C. moving the robot from one location to another
- D. All of the above.
- E. None of the above
- Correct Answer
- physically moving the robot through all the motions it is to repeat
- 1. The concept of a general CAD system was that it should provide:
Options- A. A system for handling user actions.
- B. A system for the operation of applications programming.
- C. A set of basic system functions and utilities.
- D. All of the above
- E. None of the above Discuss
- 2. The integrated circuit:
Options- A. often is called a "chip"
- B. led to the development of the transistor
- C. has revolutionized electronics
- D. (b) and (c)
- E. None of the above Discuss
- 3. The accuracy of a pick-and-place robot can be as good as:
Options- A. + 0.0005 inches
- B. + 0.05 inches
- C. 0.008 inches
- D. + 3%
- E. None of the above Discuss
- 4. Operator interaction directly with the CRT is accomplished via:
Options- A. a digitizing tablet
- B. vector scanning
- C. a stylus
- D. a touch terminal
- E. None of the above Discuss
- 5. Localizing an object in an image and selectively analyzing the object in a series of redundant layers is referred to as the:
Options- A. Turing test
- B. pyramid
- C. Gaussian pyramid
- D. Maxwell pyramid
- E. None of the above Discuss
- 6. What is offset error?
Options- A. the difference between the sensor input and the absolute sensed parameter.
- B. the difference between the controller output and the setting of the manipulated variable.
- C. the difference between the control setpoint value and the actual value.
- D. All of the above
- E. None of the above Discuss
- 7. Ergonomics refers to:
Options- A. the human aspect of the environment around the workstation as well as the workstation itself
- B. the cost relationship of the workstation versus productivity
- C. the level of involvement the operator has with the workstation
- D. the technology involved in the workstation itself
- E. None of the above Discuss
- 8. Which of the following is a graphical output device?
Options- A. Dot-matrix Printer
- B. Plotter
- C. Laser Printer
- D. Line Printer
- E. None of the above Discuss
- 9. In the operation of a programmable controller:
Options- A. all of the logic status is maintained in memory
- B. any latched data must be done using an external latching relay
- C. mathematics cannot be performed
- D. All of the above
- E. None of the above Discuss
- 10. One advantage of a PC in industrial control is that it:
Options- A. has a reliable long life compared to relay logic
- B. is very difficult for the inexperienced programmer to understand
- C. is unreliable because there are no moving parts
- D. All of the above
- E. None of the above Discuss
Automation System problems
Search Results
Correct Answer: All of the above
Correct Answer: (b) and (c)
Correct Answer: + 0.0005 inches
Correct Answer: a touch terminal
Correct Answer: Gaussian pyramid
Correct Answer: the difference between the control setpoint value and the actual value.
Correct Answer: the human aspect of the environment around the workstation as well as the workstation itself
Correct Answer: Plotter
Correct Answer: all of the logic status is maintained in memory
Correct Answer: has a reliable long life compared to relay logic
Comments
There are no comments.More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.