Discussion
Home ‣ Computer Science ‣ Windows 2000 Server Comments
- Question
You are the administrator of a network that consists of Windows 2000 Server computers and Windows 2000 Professional computers. You want to configure the deployment of the most recent Windows 2000 service pack so that users of the Windows 2000 Professional computers receive the service pack automatically when they log on to the domain. What should you do?
Options- A. Create a Microsoft Windows installer package for the service pack. Configure RIS to use the package
- B. Create a Microsoft Windows Installer package for the service pack. Configure the package in a Group Policy
- C. Create a Microsoft -Windows Installer package for the service pack. Configure the package in the Local Computer Policy
- D. Place the service pack in a Distributed file system (Dfs)
- E. None of above
- Correct Answer
- Create a Microsoft Windows Installer package for the service pack. Configure the package in a Group Policy
- 1. Five Lakes Publishing has a Windows 2000 network serving 200 users. A server named User_srv is used to hold users' files. User_srv is configured with a single, large NTFS volume. Every user has a home folder on User_srv. Users can also use a shared folder named IN_PROGRESS to store files for books that are being prepared. The network administrator at Five Lakes Publishing configured disk quotas for the NTFS volume on User_srv. All users have a default limit of 100 MB, and the option to deny space to users who exceed their limit has been enabled. When a user named Amy Jones attempts to save a chapter of a new book to her home folder on the server, she receives the following error message: "The disk is full or too many files are open." What should Amy do to allow this document to be saved?
Options- A. Compress the files in her home folder to save disk space
- B. Change the security setting of some of the files in her home folder to grant Full Control permission to a user who has not reached the quota level
- C. Move some of the files from her home folder to the IN_PROGRESS shared folder
- D. Remove files from her home folder until the total uncompressed file size is less than 100 MB
- E. None of above Discuss
- 2. You are the administrator of your company's network. You are configuring the security policy for a group of users in the finance organizational unit (OU). You need to configure a group policy so that future changes to group policy will be applied within 15 minutes to any computers that are log on to the network. What should you do?
Options- A. Enable the background refresh settings to use the default group policy refresh date
- B. Enable the asynchronous group policy application settings
- C. Enable and configure the group policy refresh interval for domain controller
- D. Enable and configure the group policy refresh interval for computers
- E. None of above Discuss
- 3. You have just configured two Windows NT Servers, Monitor 1 and Monitor 2 with no other software installed. You have an application server that needs to be monitored for performance to figure out what it's problem is, or to get some kind of baseline. You install Network Monitor on Monitor 2. What would you do to monitor Application server?
Options- A. Install Network Monitor on Monitor 1
- B. Install Network Monitor on Application Server
- C. Configure the network monitor ECP port something for TCP
- D. Configure the network monitor EDP port something for UDP
- E. Configure Monitor 2 and Application server as monitoring partners (or something) to monitor the performance Discuss
- 4. You want to provide complete redundancy for all data stored on your hardware RAID 5 array. You install second h/w Raid 5. You want to create a mirror set of the original array. However when you right click the free space on new array you see no option to create a new volume or mirrrored volume. What should you do?
Options- A. Convert both to dynamic disks
- B. Create an empty extended partition on new disk
- C. Create a single unformatted primary partition on new array
- D. Format new disk array as a single NTFS primary partition
- E. Format the new disk array as a single NTFS logical drive in an extended partition Discuss
- 5. You are the administrator of a Windows 2000 Server computer. You configure the server to audit all access to files that are places in shared folders. One week after you configured the server, users report that the server has stopped responding. You investigate the problem and discover a stop error with the error message: Stop C0000244 (Audit Failed) An attempt to generate a security audit failed. You restart the computer. You need to ensure that you can keep a record of all files access on the server. You also need to ensure that the stop error will not occur again.
Options- A. Set the CrashonAuditFail registry key to 0
- B. Set the Security Log to overwrite events as needed
- C. Delete the Liscense Trial registry key
- D. Increase the size of the security log
- E. Save the security log to a file, and clear it every morning Discuss
- 6. You are the network administrator for your company. The company has numerous branch offices, and each office uses Internet Connecting Sharing to connect to the Internet. A new employee named David Johnson is configuring a Windows 2000 Server computer as a file server. When David uses Windows update for the first time and select Product Update, he receives an error message stating that access is denied. David needs to be able to update the file by using his account. What should you do?
Options- A. Configure the settings for Internet Connecting Sharing to allow POP3 access
- B. Configure the settings for Internet Connecting Sharing to allow SMTP access
- C. Give David's user account administrator privileges on the Windows 2000 Server computer
- D. Instruct David to log on as a domain administrator on the Windows 2000 Server computer
- E. None of above Discuss
- 7. Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day, You use Disk Management and discover that the status of the third disk in the array is Missing. You want to recover the failed RAID-5 volume. What should you do first?
Options- A. Replace the third disk and restart the server. Use disk Management to repair the volume
- B. Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk
- C. Ensure that the third disk is attached to the server and has power. Use Disk Management to repair the volume
- D. Install a new disk and create a single extended partition on the new disk. Restart the computer and allow Windows 2000 to automatically repair the volume on the extended partition
- E. None of above Discuss
- 8. You install your boot volume on volume C on your Windows 2000 Server computer. You mirror volume C on dynamic Disk 1. Two years later, during routine server maintenance, you open Disk Management and find that the status of volume C is Failed Redundancy. The status of Disk 1 is Missing. You attempt to reactivate Disk 1, but the status of volume C does not return to Healthy. What should you do next?
Options- A. Replace Disk 1 and restart the computer. The mirror will automatically regenerate
- B. Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new Disk 1
- C. Replace Disk 1 and copy all data from volume C to a new NTFS primary partition on the new Disk 1. Restart the computer
- D. Rescan the disks, remove the mirror, and delete the data on Disk 1. Then re-create the mirror
- E. None of above Discuss
- 9. A Windows 2000 Server computer named server2 runs numerous 32bit applications and two 16bit applications. Users start the 16bit applications by running APP1.EXE for one application and APP2.EXE for another application. The 16bit applications are configured to run in the separate memory space. You want to create a performance base like chart in the system monitor for all the applications on server2. You add all of 32bit applications and now you want to add two 16bit applications. What should you do?
Options- A. Add the APP1 and APP2 instances to the processor time counter for the process object
- B. Add the NTVDM, APP1 and APP2 instances for the processor time counter for the process object
- C. Add only the NTVDM instance for the percent processor time counter for the process object
- D. Add the NTVDM 1 and NTVDM #2 instances for processor time counter for the process object
- E. None of above Discuss
- 10. You are the administrator of Windows 2000 Server network. On each server you format a separate system partition and a separate boot partition as NTFS. Several months later you shut down one of the computers for maintenance. When you try to restart the computer you receive the following error message "NTLDR is missing, press any key to restart". You want to install a new NTLDR file on the computer but you do not want to loose any settings you made since the installation. What should you do?
Options- A. Start the computer by using Windows 2000 Server computer CD-ROM and choose tools to repair the installation. Select recovery console and copy the NTLDR file on the CD-ROM to the root of the system volume
- B. Start the computer by using the Windows 2000 server CD- ROM, choose to reinstall. When the installation is complete copy the NTLDR to the root of the boot volume
- C. Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt run the sfc/scanboot command
- D. Start the computer by using Windows 2000 bootable floppy disk. Run the file signature verification utility
- E. None of above Discuss
Windows 2000 Server problems
Search Results
Correct Answer: Remove files from her home folder until the total uncompressed file size is less than 100 MB
Correct Answer: Enable and configure the group policy refresh interval for computers
Correct Answer: Configure the network monitor ECP port something for TCP
Correct Answer: Convert both to dynamic disks
Correct Answer: Set the CrashonAuditFail registry key to 0
Correct Answer: Give David's user account administrator privileges on the Windows 2000 Server computer
Correct Answer: Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk
Correct Answer: Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new Disk 1
Correct Answer: Add the NTVDM 1 and NTVDM #2 instances for processor time counter for the process object
Correct Answer: Start the computer by using Windows 2000 Server computer CD-ROM and choose tools to repair the installation. Select recovery console and copy the NTLDR file on the CD-ROM to the root of the system volume
Comments
There are no comments.More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.