logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Computer Hardware Comments

  • Question
  • What are the most likely conditions for ESD?


  • Options
  • A. Cold and wet
  • B. Cold and dry
  • C. Hot and wet
  • D. Hot and dry
  • E. None of the above

  • Correct Answer
  • Cold and dry 


  • Computer Hardware problems


    Search Results


    • 1. Pick the correct choice for the 8088 CPU.

    • Options
    • A. 16 bit word size, 8 bit data path
    • B. 8 bit word size, 8 bit data path
    • C. 16 bit word size, 16 bit data path
    • D. 4 bit word size, 8 bit data path
    • E. 8 bit word size, 16 bit data path
    • Discuss
    • 2. You are installing an IDE hard drive that will be your boot drive. Which is the correct order of steps that need to be followed?

    • Options
    • A. jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition
    • B. jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch
    • C. jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch
    • D. jumper properly, auto-detect in CMOS, regular format
    • E. jumper properly, partition, low level format, high level format
    • Discuss
    • 3. You are testing the resistance in Ohms of a fuse on a 2 amp system. If the fuse is good, the meter should read?

    • Options
    • A. 0.0
    • B. 0.2
    • C. 5.0
    • D. 2.0
    • E. None of the above
    • Discuss
    • 4. How would you allow device drivers and TSR's to be loaded into Upper Memory Blocks?

    • Options
    • A. DOS=High
    • B. devicehigh=
    • C. loadhigh=
    • D. DOS=UMB
    • E. None of the above
    • Discuss
    • 5. In inkjet technology the droplets of ink are deflected by?

    • Options
    • A. Electrically Charge Plate
    • B. Multi directional nozzle
    • C. High pressure jets
    • D. All of the above
    • E. None of the above
    • Discuss
    • 6. In ROM BIOS, the acronym BIOS stands for:

    • Options
    • A. Basic Intuitive Output Set
    • B. Basic Input Organizational System
    • C. Basic Input Output System
    • D. Basic Industry Operating System
    • E. None of the above
    • Discuss
    • 7. What is the result of adding an IP address to the DNS server search order

    • Options
    • A. It restricts browsing to that DNS server
    • B. It overrides the local systems IP address
    • C. It tells the DNS Server where the local system is located
    • D. It tells the local system where the DNS Server is located
    • E. None of the above
    • Discuss
    • 8. What could cause a fixed disk error?

    • Options
    • A. CDROM drive not installed
    • B. Incorrect CMOS settings
    • C. Incorrect RAM settings
    • D. All of the above
    • E. None of the above
    • Discuss
    • 9. The output voltages of a PC power supply are in the form of _____ current.

    • Options
    • A. AC
    • B. DC
    • C. amperage
    • D. resistive
    • E. trickle
    • Discuss
    • 10. Upper Memory blocks are located where?

    • Options
    • A. Conventional Memory
    • B. Extended Memory
    • C. Expanded memory
    • D. Reserved Memory
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment