Discussion
Home ‣ Computer Science ‣ Computer Hardware Comments
- Question
Which is the most difficult environmentally to dispose of?
Options- A. floppy drives
- B. hard drives
- C. power supplies
- D. CRTs
- E. system boards
- Correct Answer
- CRTs
- 1. A 2xx POST error code indicates a problem with:
Options- A. RAM or ROM
- B. hard drive
- C. system board
- D. second adapter card
- E. CMOS battery Discuss
- 2. What are the IRQ's for sound card?
Options- A. IRQ8
- B. IRQ4
- C. IRQ5
- D. IRQ7
- E. None of the above Discuss
- 3. Which best describes a fragmented hard drive:
Options- A. The platters are bad
- B. Data files are corrupted
- C. Clusters of data are damaged
- D. Files are not stored in consecutive clusters
- E. None of the above Discuss
- 4. An anti static strap uses a small _____ to make sure you do not become the least path of resistance to the ground?
Options- A. capacitor
- B. diode
- C. transistor
- D. resistor
- E. None of the above Discuss
- 5. After you service a laser printer, you notice dirty print. Which of the following would correct the problem.
Options- A. Clean the developer tank
- B. Reset the printer
- C. Run several blank pages
- D. Clean the laser diode
- E. None of the above Discuss
- 6. A Type 1 PCMCIA card is:
Options- A. The same physical size as other PCMCIA cards but configured differently
- B. The thinnest PCMCIA card, measuring 3.5mm in thickness
- C. The thickest PCMCIA card, measuring 10.5mm in thickness
- D. An old standard that is not compatible with the newest laptops
- E. None of the above Discuss
- 7. Which type of system hoard is the MOST likely candidate for processor upgrading if you want maximum performance and future compatibility?
Options- A. ML
- B. PCI
- C. ISA
- D. EISA
- E. None of the above Discuss
- 8. You can place an ISA device in an EISA slot.
Options- A. True
- B. False Discuss
- 9. ESD damage can be caused by:
Options- A. Placing an IC in a non-conductive plastic bag
- B. Placing an IC on a grounded mat
- C. Repeated sags in current supplied from outlets
- D. Touching metal on the chassis
- E. None of the above Discuss
- 10. What component would most likely cause a "parity error"?
Options- A. bad hard disk
- B. bad controller
- C. bad RAM
- D. bad software
- E. None of the above Discuss
Computer Hardware problems
Search Results
Correct Answer: RAM or ROM
Correct Answer: IRQ5
Correct Answer: Files are not stored in consecutive clusters
Correct Answer: resistor
Correct Answer: Run several blank pages
Correct Answer: The thinnest PCMCIA card, measuring 3.5mm in thickness
Correct Answer: PCI
Correct Answer: True
Correct Answer: Placing an IC in a non-conductive plastic bag
Correct Answer: bad RAM
Comments
There are no comments.More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.