logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Computer Hardware Comments

  • Question
  • "Parity" errors usually indicate bad memory


  • Options
  • A. True
  • B. False

  • Correct Answer
  • True 


  • Computer Hardware problems


    Search Results


    • 1. During the boot process, a system first counts memory from where?

    • Options
    • A. Expansion memory board
    • B. Video adapter
    • C. System board
    • D. Cache
    • E. None of the above
    • Discuss
    • 2. To prevent the computer from overheating you should?

    • Options
    • A. Remove the slot cover from the back
    • B. Keep the computer cover closed
    • C. Remove the CPU fan
    • D. All of the above
    • E. None of the above
    • Discuss
    • 3. What command is used to reset a MODEM when using the

    • Options
    • A. ATR
    • B. ATZ
    • C. DTR
    • D. DCE
    • E. None of the above
    • Discuss
    • 4. How can you totally protect a PC from damage during an electrical storm?

    • Options
    • A. Disconnect the AC power cable
    • B. Disconnect all external cables and power cords
    • C. Use a surge protector
    • D. Turn off the AC power
    • E. None of the above
    • Discuss
    • 5. Modems use _____ transmission.

    • Options
    • A. Synchronous
    • B. Asynchronous
    • C. Timed interval
    • D. PPP
    • E. None of the above
    • Discuss
    • 6. You have just installed a new internal PCI modem on you desktop. It will not dial out. what is the problem?

    • Options
    • A. The port speed is set too high
    • B. the modem has not been set up in control panel properties
    • C. the phone line is plugged into the line-in port on the modem card
    • D. the phone line out of the wall is plugged into the phone port on the modem card
    • E. None of the above
    • Discuss
    • 7. After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the:

    • Options
    • A. System's floppy drive device driver
    • B. Original IDE controller
    • C. Floppy drive ribbon cable
    • D. System's power supply
    • E. None of the above
    • Discuss
    • 8. IRQ6 is typically reserved for:

    • Options
    • A. The floppy
    • B. The keyboard controller
    • C. LPT2
    • D. The modem
    • E. None of the above
    • Discuss
    • 9. How may standard levels of interrupts are provided on the 8-bit ISA bus (XT-class computer)?

    • Options
    • A. 4
    • B. 8
    • C. 12
    • D. 16
    • E. None of the above
    • Discuss
    • 10. What should he used to extinguish a computer fire?

    • Options
    • A. fire hose
    • B. class a extinguisher
    • C. class c extinguisher
    • D. silver foam water
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment