logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Computer Hardware Comments

  • Question
  • During the fusing process, toner is:


  • Options
  • A. dry pressed into the paper
  • B. electrically bonded to the paper
  • C. melted into the paper
  • D. glued to the paper
  • E. high pressure sprayed onto the paper

  • Correct Answer
  • high pressure sprayed onto the paper 


  • Computer Hardware problems


    Search Results


    • 1. A laser printer generates a totally black page, what is the cause?

    • Options
    • A. malfunctioning imaging laser
    • B. low level in the toner cartridge
    • C. no power to transfer corona
    • D. no power to the primary corona
    • E. None of the above
    • Discuss
    • 2. Which is LEAST likely to interfere with upgrading to a newer DOS version?

    • Options
    • A. ROM BIOS
    • B. Video controller
    • C. Compressed drives
    • D. Existing backup files
    • E. None of the above
    • Discuss
    • 3. What does the acronym RTS represent?

    • Options
    • A. Required to save
    • B. Ready to start
    • C. Request to send
    • D. Right to separate
    • E. None of the above
    • Discuss
    • 4. Which type of pc card (PCMCIA) slot will allow the insertion of a hard drive?

    • Options
    • A. type I
    • B. type II
    • C. type III
    • D. type IV
    • E. None of the above
    • Discuss
    • 5. ISDN stands for:

    • Options
    • A. internal select data nulls
    • B. integrated services digital network
    • C. interval set down next
    • D. interior sector direct none
    • E. inferior sector data net
    • Discuss
    • 6. How can you totally protect a PC from damage during an electrical storm?

    • Options
    • A. Disconnect the AC power cable
    • B. Disconnect all external cables and power cords
    • C. Use a surge protector
    • D. Turn off the AC power
    • E. None of the above
    • Discuss
    • 7. To test for AC ripple on a PC power supply, you would set the volt/ohm meter for:

    • Options
    • A. DC voltage scale
    • B. AC voltage
    • C. OHM scale
    • D. Farad scale
    • E. None of the above
    • Discuss
    • 8. Which best describes a fragmented hard drive:

    • Options
    • A. The platters are bad
    • B. Data files are corrupted
    • C. Clusters of data are damaged
    • D. Files are not stored in consecutive clusters
    • E. None of the above
    • Discuss
    • 9. Which provides the fastest data access time?

    • Options
    • A. RAM
    • B. ROM
    • C. CD-ROM
    • D. Hard disk
    • E. None of the above
    • Discuss
    • 10. ESD damage can be caused by:

    • Options
    • A. Placing an IC in a non-conductive plastic bag
    • B. Placing an IC on a grounded mat
    • C. Repeated sags in current supplied from outlets
    • D. Touching metal on the chasis
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment