logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Computer Hardware Comments

  • Question
  • You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?


  • Options
  • A. as a master
  • B. as a secondary
  • C. as a slave
  • D. as a primary
  • E. as auto-select

  • Correct Answer
  • as a slave 


  • Computer Hardware problems


    Search Results


    • 1. The following process determines the amount of memory present, the date/ time, and which communications ports and display adapters are installed in a microcomputer?

    • Options
    • A. Start-up utility test
    • B. Power on Self Test
    • C. Power up boot process
    • D. Power on start up process
    • E. None of the above
    • Discuss
    • 2. What is the i/o address for com3?

    • Options
    • A. 3e8
    • B. 345
    • C. ff8
    • D. 5e8
    • E. be8
    • Discuss
    • 3. On a leased line installation a known good external modem shows no carrier detect light. Where is the problem most likely to be?

    • Options
    • A. In the modem
    • B. In the phone line
    • C. In the computer
    • D. In the DTC equipment
    • E. None of the above
    • Discuss
    • 4. Which device uses a DMA channel?

    • Options
    • A. Modem
    • B. Network Card
    • C. Sound Card
    • D. All of the above
    • E. None of the above
    • Discuss
    • 5. The monitor power LED is 'on' but the monitor screen is completely dark. The least likely cause of the problem is:

    • Options
    • A. Defect in the computers video circuitry
    • B. Disconnected video cable
    • C. Defective monitor
    • D. System RAM problem
    • E. None of the above
    • Discuss
    • 6. In inkjet printers, what is the most common problem with the paper tray?

    • Options
    • A. inconsistent printing
    • B. malfunctioning pick-up rollers
    • C. misalignment of the sheet feeder
    • D. paper jamming on the ink cartridge
    • E. None of the above
    • Discuss
    • 7. Which REQUIRES an anti-static bag for transport?

    • Options
    • A. Monitor
    • B. Floppy disks
    • C. Power supply
    • D. I/O controller
    • E. None of the above
    • Discuss
    • 8. On a dot-matrix printer, regular lube maintenance should be followed, but this component should never be lubed:

    • Options
    • A. Platten bearings
    • B. Carriage rails
    • C. Printhead
    • D. Paper advance bearings
    • E. None of the above
    • Discuss
    • 9. In addition to I/O port addresses, SCSI adapters also use a range of ROM addresses for their onboard BIOS.

    • Options
    • A. True
    • B. False
    • Discuss
    • 10. A wrist grounding strap contains which of the following:

    • Options
    • A. Surge protector
    • B. Capacitor
    • C. Voltmeter
    • D. Resistor
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment