logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Computer Hardware Comments

  • Question
  • What are the most likely conditions for ESD?


  • Options
  • A. Hot and dry
  • B. Hot and wet
  • C. Cold and dry
  • D. Cold and wet
  • E. None of the above

  • Correct Answer
  • Hot and wet 


  • Computer Hardware problems


    Search Results


    • 1. A PC with a 486DX2 processor runs internally at 50Mhz. What speed would its external logic be running?

    • Options
    • A. l0Mhz
    • B. 25Mhz
    • C. 50Mhz
    • D. 100 Mhz
    • E. None of the above
    • Discuss
    • 2. Which component must be vacuumed or replaced during preventative maintenance on a laser printer?

    • Options
    • A. Scanning mirror
    • B. Toner cartridge
    • C. Ozone filter
    • D. All of the above
    • E. None of the above
    • Discuss
    • 3. What IRQ is used for COM 2?

    • Options
    • A. 4
    • B. 3
    • C. 2
    • D. 1
    • E. None of the above
    • Discuss
    • 4. If the voltage on pin 1 of the power supply is not in the range of _____ volts, the PC will not boot.

    • Options
    • A. 10 - 20
    • B. 1 - 5
    • C. 50 - 110
    • D. 15 - 25
    • E. 2.5 - 5
    • Discuss
    • 5. The DC voltage on most circuit boards is:

    • Options
    • A. -12 volts
    • B. 0 volts
    • C. +5 volts
    • D. +12 volts
    • E. None of the above
    • Discuss
    • 6. Which of the following items would require you t.o comply with EPA disposal guidelines?

    • Options
    • A. Keyboard
    • B. System board
    • C. Power supply
    • D. Battery
    • E. None of the above
    • Discuss
    • 7. Static electricity thrives is which type of environment?

    • Options
    • A. cold and humid
    • B. warm and humid
    • C. warm and dry
    • D. cold and warm
    • E. cold and dry
    • Discuss
    • 8. How is ink transferred to paper in common ink jet printers?

    • Options
    • A. Boiling ink
    • B. Crystal
    • C. Motorized pump
    • D. Screens deflect ink on the paper into the proper positions
    • E. Ink is sprayed on to the paper and managed by a nozzle
    • Discuss
    • 9. The digital multimeter is set for DC, Ohm and 20k. You will read _____ while measuring a good 2 amp fuse.

    • Options
    • A. 0.00
    • B. 0.02
    • C. 0.20
    • D. 2.00
    • E. None of the above
    • Discuss
    • 10. Which would you have to upgrade to install an EIDE drive?

    • Options
    • A. RAM BIOS
    • B. A 286 CPU
    • C. Controller board
    • D. ISA motherboard
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment