Discussion
Home ‣ Computer Science ‣ Computer Hardware Comments
- Question
IRQ6 is typically reserved for:
Options- A. The floppy
- B. The keyboard controller
- C. LPT2
- D. The modem
- E. None of the above
- Correct Answer
- The floppy
- 1. When measuring AC (Alternating Current) with a multimeter, it is important to maintain the proper polarity.
Options- A. True
- B. False Discuss
- 2. If the memory slots have 30 pins then the chip is a?
Options- A. DIMM
- B. SIMM
- C. SDRAM
- D. All of the above
- E. None of the above Discuss
- 3. Which device is on IRQ 6?
Options- A. Keyboard
- B. IDE
- C. Floppy drive
- D. Video card
- E. None of the above Discuss
- 4. Why does a successfully mapped network drive disappear every time you boot the computer?
Options- A. The computer you are connected to has moved
- B. You didn't click reconnect on log on
- C. The map statement is not in the autoexec.bat file
- D. The last drive was not set correctly
- E. None of the above Discuss
- 5. A C++ program contains a function with the header int function(double d, char c). Which of the following function headers could be used within the same program?
Options- A. char function(double d, char c)
- B. int function(int d, char c)
- C. both (a) and (b)
- D. neither (a) nor (b) Discuss
- 6. When measuring AC (Alternating Current) with a multimeter, it is important to maintain the proper polarity.
Options- A. True
- B. False Discuss
- 7. ESD potential decreases with the use of:
Options- A. De-ionizing fans
- B. A wrist strap
- C. Rubber gloves with matching cap
- D. A static meter
- E. None of the above Discuss
- 8. What is the highest binary number that can be referred to on a three position jumper block?
Options- A. 4
- B. 6
- C. F
- D. 1
- E. None of the above Discuss
- 9. When connecting a ribbon cable to a connector, how do you know which direction to plug it in?
Options- A. The red line in the cable goes to the highest pin number
- B. The colored line in the cable goes to pin #1
- C. It does not matter
- D. The blue or red line in the cable goes away from the power connector
- E. None of the above Discuss
- 10. What do you need to check serial and parallel port?
Options- A. Port adapter
- B. Logic probe
- C. Loopback plug
- D. All of the above
- E. None of the above Discuss
Computer Hardware problems
Search Results
Correct Answer: False
Correct Answer: SIMM
Correct Answer: Floppy drive
Correct Answer: The map statement is not in the autoexec.bat file
Correct Answer: int function(int d, char c)
Correct Answer: False
Correct Answer: A wrist strap
Correct Answer: 1
Correct Answer: The colored line in the cable goes to pin #1
Correct Answer: Loopback plug
Comments
There are no comments.More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.