logo

CuriousTab

CuriousTab

Discussion


Home Electrical Engineering Parallel Circuits See What Others Are Saying!
  • Question
  • In a parallel circuit, the branch with the lowest resistance has the most current.


  • Options
  • A. True
  • B. False

  • Correct Answer
  • True 


  • More questions

    • 1. A 12 Ω resistor, a 40 µF capacitor, and an 8 mH coil are in series across an ac source. The resonant frequency is

    • Options
    • A. 28.1 Hz
    • B. 281 Hz
    • C. 2,810 Hz
    • D. 10 kHz
    • Discuss
    • 2. Three 10 kΩ resistors are connected in series. A 20 kΩ resistor is connected in parallel across one of the 10 kΩ resistors. The voltage source is 24 V. The total current in the circuit is

    • Options
    • A. 900 µA
    • B. 9 mA
    • C. 90 mA
    • D. 800 µA
    • Discuss
    • 3. The voltages in Problem 5 are measured at a certain frequency. To make the resistor voltage less than the inductor voltage, the frequency is

    • Options
    • A. increased
    • B. decreased
    • C. doubled
    • D. not a factor
    • Discuss
    • 4. The current in a given circuit is not to exceed 24 A. Which value of fuse is best?

    • Options
    • A. a fuse is not necessary
    • B. 10 A
    • C. 24 A
    • D. 20 A
    • Discuss
    • 5. A 120 Ω resistor is in parallel with a capacitor with a capacitive reactance of 40 Ω. Both components are across a 12 V ac source. What is the magnitude of the total impedance?

    • Options
    • A. 37.9 Ω
    • B. 3.7 Ω
    • C. 14,400 Ω
    • D. 4,800 Ω
    • Discuss
    • 6. A 12 mA current source has an internal resistance, RS, of 1.2 kΩ. The equivalent voltage source is

    • Options
    • A. 144 V
    • B. 14.4 V
    • C. 7.2 V
    • D. 72 mV
    • Discuss
    • 7. Total power in a parallel circuit is found by adding up the power of all the individual resistors.

    • Options
    • A. True
    • B. False
    • Discuss
    • 8. Referring to Problem 23, what will the output voltage be if the coil's internal resistance is neglected?

    • Options
    • A. 0 V
    • B. 200 mV
    • C. 11.1 mV
    • D. 111 mV
    • Discuss
    • 9. When the current through an inductor decreases, the amount of energy stored in the electromagnetic field

    • Options
    • A. increases
    • B. decreases
    • C. remains the same
    • D. doubles
    • Discuss
    • 10. When a load resistance is removed from the output of a voltage divider circuit, the current drawn from the source

    • Options
    • A. decreases
    • B. increases
    • C. remains the same
    • D. is cut off
    • Discuss


    Comments

    There are no comments.

Enter a new Comment