List I | List II | ||
---|---|---|---|
A. | Flash converter ADC | 1. | requires conversion time of a few ?s |
B. | Dual slope ADC | 2. | requires DAC |
C. | Successive approximation ADC | 3. | minimizes the effect of power supply interference |
4. | requires complex hardware | ||
5. | is a tracking ADC |
List I (Transducer) | List II (Quantity measured) | ||
---|---|---|---|
A. | LVDT | 1. | Pressure |
B. | Bourden gauge | 2. | Temperature |
C. | Strain gauge | 3. | Displacement |
D. | Thermistor | 4. | Stress |
List I (Bit Pattern) | List II (Register pairs) | ||
---|---|---|---|
A. | 00 | 1. | SP |
B. | 01 | 2. | B-C |
C. | 10 | 3. | D-E |
D. | 11 | 4. | H-L |
List I | List II | ||
---|---|---|---|
A. | Wein bridge oscillator | 1. | Low output impedance |
B. | Voltage shunt feedback amplifier | 2. | RF frequency range |
C. | Crystal oscillator | 3. | Audio frequency range |
D. | Current shunt feedback amplifier | 4. | High input impedance |
5. | High output impedance |
List I | List II | ||
---|---|---|---|
A. | RF amplifier | 1. | Amplifier received carrier and sidebands |
B. | Loudspeaker | 2. | Gives acoustic output |
C. | Demodulator | 3. | Has IF input and AF output |
D. | IF amplifier | 4. | Fixed-tuned to intermediate frequency |
List I | List II | ||
---|---|---|---|
A. | Direct addressing | 1. | MOV A, M |
B. | Register addressing | 2. | MOV C, A |
C. | Register indirect addressing | 3. | LDA 7 |
D. | Immediate addressing | 4. | STA FFC |
List I (Operator) | List II (Description) | ||
---|---|---|---|
A. | ? : | 1. | Modulus |
B. | [ ] | 2. | Array expression |
C. | % | 3. | Conditional |
List I | List II | ||
---|---|---|---|
A. | Ternary | 1. | 0, 1, 3 |
B. | Quaternary | 2. | 0, 1, 2, 3, 4, 5, 6 7, 8, 9, A, B |
C. | Quinary | 3. | 0, 1, 2, 3, 4 |
D. | Duodecimal | 4. | 0, 1, 2 |
List I (Transmission system) | List II (Mode) | ||
---|---|---|---|
A. | Rectangular waveguide | 1. | TE/TM |
B. | Circular waveguide | 2. | TEM |
C. | Coaxial line | 3. | Quasi TEM |
D. | Microstrip line |
List I (Functional headings of instruction set of 8085) | List II (Functions performed) | ||
---|---|---|---|
A. | Branch group | 1. | Compares, rotates etc. |
B. | Logic group | 2. | Moves, loads, stores etc. |
C. | Data transfer group | 3. | Initiates conditional or unconditional jumps, calls etc. |
List I (Camera pick up tubes) | List II (Special feature) | ||
---|---|---|---|
A. | Vidicon | 1. | Highest sensitivity |
B. | Plumbicon | 2. | Temperature sensitive |
C. | Saticon | 3. | Large lag |
D. | New vicon | 4. | Special target for red response |
Comments
There are no comments.Copyright ©CuriousTab. All rights reserved.