Discussion
Home ‣ Electronics and Communication Engineering ‣ Microwave Communication Comments
- Question
A line of characteristic impedance 400 ? is terminated by a resistance of 400 ?. The reflected quantities are
Options- A. zero
- B. equal to incident quantities
- C. half the incident quantities
- D. double the incident quantities
- Correct Answer
- zero
- 1. Most electromagnetic transmission in rectangular wave-guide uses
Options- A. TE10 mode
- B. TE01 mode
- C. TE20 mode
- D. TE11 mode Discuss
- 2. Which of the following lines behaves as infinite line?
Options- A. a line terminated in inductance
- B. a line terminated in capacitance
- C. a short line
- D. a line terminated in z0 Discuss
- 3. Radar reciever has high sensitivity and low noise figure
Options- A. True
- B. False Discuss
- 4. Which mode is called dominant mode in rectangular wave guide?
Options- A. TE01
- B. TE11
- C. TE10
- D. TE20 Discuss
- 5. The electrical requirement on wall thickness of rectangular wave guide is
Options- A. wall thickness is more than skin depth
- B. wall thickness is less than skin depth
- C. wall thickness is equal to skin depth
- D. either (b) or (c) Discuss
- 6. VTM stands for voltage tunable magnetron.
Options- A. True
- B. False Discuss
- 7. The main advantage of TWT over klystron is
Options- A. higher bandwidth
- B. higher gain
- C. higher frequency
- D. higher output Discuss
- 8. Fields are said to be circularly polarized if
Options- A. their magnitudes are equal
- B. their magnitudes are equal and they differ in phase by ± 90°
- C. their magnitudes are unequal and they differ in phase ± 90°
- D. their magnitudes are unequal and they are in phase Discuss
- 9. The frequency of oscillations obtained from a reflex klystron depends mainly on
Options- A. resonant frequency of cavity
- B. repeller voltage
- C. voltage of focussing electrode
- D. characteristics of cathode Discuss
- 10. Assertion (A): Two equal and opposite travelling waves result in a standing wave.
Reason (R): The ratio of maximum to minimum value of a standing wave is called SWR.
Options- A. Both A and R are correct and R is correct explanation of A
- B. Both A and R are correct but R is not correct explanation of A
- C. A is correct but R is wrong
- D. A is wrong but R is correct Discuss
Microwave Communication problems
Search Results
Correct Answer: TE10 mode
Correct Answer: a line terminated in z0
Correct Answer: True
Correct Answer: TE10
Correct Answer: wall thickness is more than skin depth
Correct Answer: True
Correct Answer: higher bandwidth
Correct Answer: their magnitudes are equal and they differ in phase by ± 90°
Correct Answer: resonant frequency of cavity
Correct Answer: Both A and R are correct but R is not correct explanation of A
Comments
There are no comments.More in Electronics and Communication Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.