The operation of magnetron is based on interaction of electromagnetic fields with electrons moving in static electric and magnetic fields oriented at 90° with respect to each other.
In a magnetron three forces act on electron viz. force due to electric field (equal to - eE), force due to magnetic field [equal to - e (v x B)] and centrifugal force (equal to mv2/r).
The path of the electron can be found by balancing these three forces. Magnetron can be of three types i.e., negative resistance device, cyclotron frequency device and travelling wave or cavity device.
In negative resistance magnetron use is made of the negative resistance between two anode segments.
It has low efficiency and is used at frequencies less than 0.5 GHz.
In cyclotron magnetron a synchronism exists between ac component of electric field and periodic oscillation of electrons in a direction parallel to the field.
It is used for frequencies higher than 100 MHz.
A cavity magnetron has a number of cylindrical cavities in the interaction region.
The cavity magnetron is the most common type of magnetron. Its features are :
1. Frequency range - 500 MHz to 10 GHz
2. Power output - 250 kW (pulses)
3. Efficiency - about 50%
It is used in radar systems, industrial heating systems and microwave ovens.
9. To ensure that only dominant mode TE10 is allowed to propagate in an air filled rectangular waveguide, the lower frequency limit and upper frequency limit are
Options
A. about 25% above fc for TE10 and 5% below fc for TE20 mode respectively
B. about 50% above fc for TE10 and 25% below fc for TE20 mode respectively
C. about 25% above fc for TE10 and 25% below fc for TE20 mode respectively
