logo

CuriousTab

CuriousTab

Discussion


Home Electronics and Communication Engineering Power Electronics Comments

  • Question
  • The stud in a stud mounted SCR acts as


  • Options
  • A. anode
  • B. cathode
  • C. gate
  • D. anode or cathode

  • Correct Answer
  • anode 


  • Power Electronics problems


    Search Results


    • 1. A thyristor circuit is feeding an R-L load. The turn on time can be reduced by

    • Options
    • A. decreasing R
    • B. decreasing L
    • C. increasing L
    • D. decreasing R and L together
    • Discuss
    • 2. The total number of leads in MOS controlled thyristor is

    • Options
    • A. 2
    • B. 3
    • C. 4
    • D. 2 or 3
    • Discuss
    • 3. In a controlled rectifier a freewheeling diode is necessary if the load is

    • Options
    • A. inductive
    • B. resistive
    • C. capacitive
    • D. any of the above
    • Discuss
    • 4. Which of these commutation methods uses two leads?

    • Options
    • A. Class A
    • B. Class B
    • C. Class C
    • D. Class D
    • Discuss
    • 5. A cycloconverter for single phase operation has

    • Options
    • A. one positive group and one negative group converters
    • B. two positive group and two negative group converters
    • C. three positive group and three negative group converters
    • D. any of the above
    • Discuss
    • 6. Assertion (A): An ac regulator uses natural commutation

      Reason (R): An ac regulator can be used for static on load tap changing of transformer.


    • Options
    • A. Both A and R are correct and R is correct explanation of A
    • B. Both A and R correct but R is not correct explanation of A
    • C. A is correct but R is wrong
    • D. A is wrong but R is correct
    • Discuss
    • 7. A dc chopper feeds an RLE load and has a duty cycle of 1. The load current will be such that

    • Options
    • A.
    • B. Imax > Imin
    • C. Imin > 0
    • D. Imin < 0
    • Discuss
    • 8. A dc chopper is feeding an RLE load. The current can become discontinuous if

    • Options
    • A. is high
    • B. a is low
    • C. E is high
    • D. none of the above
    • Discuss
    • 9. In a cycloconverter it is possible to vary

    • Options
    • A. only output frequency
    • B. only output voltage
    • C. both output voltage and frequency but not simultaneously
    • D. both output voltage and output frequency simultaneously
    • Discuss
    • 10. A single phase full bridge inverter for R-L loads needs

    • Options
    • A. 4 thyristors
    • B. 4 thyristors and 4 diodes
    • C. 4 thyristors and 2 diodes
    • D. 8 thyristors
    • Discuss


    Comments

    There are no comments.

Enter a new Comment