In sinusoidal PWM for inverters the width of different pulses are not the same.

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electronics and Communication Engineering ‣ Power Electronics Comments

Question
In sinusoidal PWM for inverters the width of different pulses are not the same.
Options
A. True
B. False

Correct Answer

True

Power Electronics problems

Search Results

1. A class D chopper
Options
A. can operate in first quadrant only
B. can operate in second quadrant only
C. can operate in either first or fourth quadrant
D. can operate in all the quadrants

2. All other parameters remaining the same, a 3 phase bridge inverter with 180� mode of operation
Options
A. has the same peak thyristor current as in 120� mode of operation
B. has higher peak thyristor current than in 120� mode of operation
C. has lower peak thyristor current than in 120� mode of operation
D. any of the above

3. In pulse width modulation of chopper
Options
A. T is kept constant and T_on is varied
B. T_on is kept constant T is varied
C. both T and T_on are varied
D. either T or T_on is varied

4. As compared to BJT, MOSFET has
Options
A. lower switching losses and higher conduction losses
B. higher switching losses and higher conduction losses
C. higher switching losses and lower conduction losses
D. lower switching losses and lower conduction losses

5. In a 3 phase full converter, the firing angle is less than 60�. The instantaneous output voltage
Options
A. will have positive part only
B. will have both positive and negative parts
C. may have both positive and negative parts
D. will have negative part if load is inductive

6. When an SCR is in forward blocking mode, the applied voltage
Options
A. appears across only one junction
B. is equally shared by two junctions
C. is equally shared by three junctions
D. may appear across one or more junctions

Comments

More in Electronics and Communication Engineering: