logo

CuriousTab

CuriousTab

Discussion


Home Electronics and Communication Engineering Power Electronics Comments

  • Question
  • An n pulse rectifier is fed by a source having an inductance L. If load current is I0, the voltage drop due to overlap is


  • Options
  • A. An n pulse rectifier is fed by a source having an inductance L. If load current is I0, the voltage d
  • B. An n pulse rectifier is fed by a source having an inductance L. If load current is I0, the voltage d
  • C. An n pulse rectifier is fed by a source having an inductance L. If load current is I0, the voltage d
  • D. An n pulse rectifier is fed by a source having an inductance L. If load current is I0, the voltage d

  • Correct Answer
  •  


  • Power Electronics problems


    Search Results


    • 1. In the circuit of figure, the waveshape of load current when thyristor conducting is

    • Options
    • A. constant
    • B. increasing exponentially
    • C. decreasing exponentially
    • D. either (b) or (c)
    • Discuss
    • 2. The symbol in figure is for

    • Options
    • A. SUS
    • B. SBS
    • C. SCS
    • D. None of the above
    • Discuss
    • 3. Assertion (A): A transistor has lower voltage drop during conduction as compared to thyristor

      Reason (R): Transistors are manufactured in very high voltage and current ratings.


    • Options
    • A. Both A and R are correct and R is correct explanation of A
    • B. Both A and R correct but R is not correct explanation of A
    • C. A is correct but R is wrong
    • D. A is wrong but R is correct
    • Discuss
    • 4. In load commutated chopper, the commutating element

    • Options
    • A. is capacitor
    • B. is capacitor and inductor
    • C. is capacitor, inductor and auxiliary thyristor
    • D. any of the above depending on load
    • Discuss
    • 5. In integral cycle control of ac regulators, the period of integral cycle control, i.e., (m + n) T should be

    • Options
    • A. less than mechanical or thermal time constant of the system
    • B. more than the mechanical or thermal time constant of the system
    • C. more or less than the mechanical or thermal time constant
    • D. very high
    • Discuss
    • 6. In brushless excitation system of modern alternators, the main exciter is

    • Options
    • A. dc generator
    • B. ac generator
    • C. either dc or ac generator
    • D. induction generator
    • Discuss
    • 7. In a step down chopper using time ratio control, the input voltage is V and duty cycle is a. The load is purely resistive having resistance R. The average and rms load currents are

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 8. If 4 quadrant operation is required we need

    • Options
    • A. dual converter
    • B. full converter
    • C. semi converter
    • D. none of the above
    • Discuss
    • 9. A separately excited dc motor is run from a dc source through a chopper. At 600 rpm and rated torque, the duty cycle of chopper is 0.8. At 600 rpm and half the rated torque, the duty cycle is likely to be

    • Options
    • A. 0.9
    • B. 0.8
    • C. 0.75
    • D. 0.6
    • Discuss
    • 10. In a 3 phase full converter, the firing angle is less than 60°. The instantaneous output voltage

    • Options
    • A. will have positive part only
    • B. will have both positive and negative parts
    • C. may have both positive and negative parts
    • D. will have negative part if load is inductive
    • Discuss


    Comments

    There are no comments.

Enter a new Comment