HVDC transmission systems generally use 12 pulse converters 6 pulse converters 3

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electronics and Communication Engineering ‣ Power Electronics Comments

Correct Answer

12 pulse converters

Explanation

To reduce ripple, 12 pulse converters are used in HVDC.

Power Electronics problems

Search Results

2. In a single phase full wave ac regulator the rms value of load current is 20 A load is purely resistive. Then
Options
A. average thyristor current will be less than 20 A but rms thyristor current will be more than 20 A
B. both the average and rms thyristor currents will be less than 20 A
C. both the average and rms thyristor currents will be more than 20 A
D. rms thyristor current will be 20 A and average thyristor current will be 10 A

3. An RC snubber circuit is used to protect a thyristor against :
Options
A. false triggering
B. failure to turn on
C. switching transients
D. failure to commutate

4. In a series inverter supplying a load resistance R, the commutating elements L and C should be such that
Options
A.
B.
C.
D.

5. Which of these triggering methods for series connected SCRs use LASCR in the gate circuit?
Options
A. Resistance triggering
B. Simultaneous triggering
C. Sequential triggering
D. Optical triggering

6. A dc separately excited motor has a constant field current. The armature is fed from a single phase supply through a semi-converter. When a = 0, speed is 600 rpm. If a = 90�, the speed is likely to be
Options
A. about 300 rpm
B. about 150 rpm
C. about 75 rpm
D. about zero

7. Assertion (A): An inverter does not require forced commutation
Reason (R): A series inverter is a forced commutation inverter.
Options
A. Both A and R are correct and R is correct explanation of A
B. Both A and R correct but R is not correct explanation of A
C. A is correct but R is wrong
D. A is wrong but R is correct

8. A single phase series converter is used for
Options
A. high voltage output
B. high current output
C. high voltage and high current output
D. improving the circuit efficiency

9. The average load current supplied by a thyristor depends on
Options
A. firing angle
B. firing frequency
C. magnitude of gate current
D. all of the above

Comments

There are no comments.

More in Electronics and Communication Engineering: