logo

CuriousTab

CuriousTab

Discussion

Home ‣ Civil Engineering ‣ GATE Exam Questions Comments
  • Question

  • The material that exhibits the same elastic properties in all the directions at a point, is said to be


  • Options
  • A. homogeneous
  • B. orthotropic
  • C. visco-elastic
  • D. isotropic

  • Correct Answer
  • isotropic 

    • GATE Exam Questions problems

    Search Results

    • 1. The disinfection efficiency of chlorine in water treatment

    • Options
    • A. is not dependent on pH value.
    • B. is increased by increased pH values.
    • C. remains constant at all pH values.
    • D. is reduced by increased pH value.
      • Discuss
    • 2. If the deformations of the truss-members are as shown in parentheses, the rotation of the member bd is :

    • Options
    • A. 0.5 x 10-2 radian
    • B. 1.0 x 10-2 radian
    • C. 1.5 x 10-2 radian
    • D. 2.0 x 10-2 radian
      • Discuss
    • 3. A circular sewer 2 m diameter has to carry a discharge of 2 m3/s when flowing nearly full. What is the minmum required slope to initiate the flow? (Assume Manning's n = 0.015)

    • Options
    • A. 0.00023
    • B. 0.000036
    • C. 0.000091
    • D. 0.000014
      • Discuss
    • 4. Which one of the following statements is true with regard to the flexibility method of analysis?

    • Options
    • A. The method is used to analyse determinate structures
    • B. The method is used only for manual analysis of indeterminate structures
    • C. The method is used for analysis of flexible structures
    • D. The method is used for analysis of indeterminate structures with lesser degree of static indeterminacy.
      • Discuss
    • 5. An isolated T beam is used as a walkway. The beam is simply supported with an effective span of 6 m. The effective width of flange, for the cross-section shown in the below figure is

    • Options
    • A. 900 mm
    • B. 1000 mm
    • C. 1259 mm
    • D. 2200 mm
      • Discuss
    • 6. For a highway with design speed of 100 kmph, the safe overtaking sight distance is (assume accelerations as 0.53 m/sec2)

    • Options
    • A. 300 m
    • B. 750 m
    • C. 320 m
    • D. 470 m
      • Discuss
    • 7. What is the equivalent single wheel load of a dual wheel assembly carrying 20, 440 N each for pavement thickness of 20 cm? Centre to centre spacing of tyres is 27 cm and the distance between the walls of tyres is 11 cm

    • Options
    • A. 27, 600 N
    • B. 32, 300 N
    • C. 40, 880 N
    • D. 30, 190 N
      • Discuss
    • 8. The type of surveying in which the curvature of the earth is taken into account is called

    • Options
    • A. Geodetic surveying
    • B. Plane surveying
    • C. Preliminary surveying
    • D. Topographical surveying
      • Discuss
    • 9. The shape of clay particle is usually

    • Options
    • A. angular
    • B. flaky
    • C. tubular
    • D. rounde
      • Discuss
    • 10. The relationship between the length (l) and radius (r) of an ideal transition curve is given by

    • Options
    • A. l ? r
    • B. l ? r2
    • C. l ? 1/r
    • D. l ? 1/r2
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.