The flow of water (mass density = 1000 kg/m3 and kinematic viscosity = 10-6 m2/s

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ GATE Exam Questions See What Others Are Saying!

Question
The flow of water (mass density = 1000 kg/m³ and kinematic viscosity = 10^-6 m²/s) in a commercial pipe, having equivalent roughness k_s as 0.12 mm, yields an average shear stress at the pipe boundary = 600 N/m². The value of k_s/?' (?' being the thickness of laminar sub-layer) for this pipe is
Options
A. 0.25
B. 0.50
C. 6.0
D. 8.0

Correct Answer

8.0

More questions

1. For the design of major hydraulic structures on the canals, the method generally preferred to, is based on
Options
A. Bligh's theory
B. Electrical analogy method
C. The relaxation method
D. Khosla's method of independent variables.

3. In sewers the velocity of flow should not be
Options
A. more than the self-cleansing velocity
B. less than the self-cleansing velocity
C. less than 10 m/sec
D. more than 20 m/sec.

5. Pick up the correct statement from the following:
Options
A. A wire wound in spiral form, is called a helical spring
B. The pitch of a close coil spring, is very small
C. The angle made by the coil with horizontal, is called the angle of helix
D. In the open coil helical spring, the angle of helix is comparatively large
E. All the above.

7. Pick up the correct statement from the following:
Options
A. Duty of canal water is defined as the total area irrigated by the discharge averaging one unit during the base period of the duty
B. Duty of canal water is usually calculated at the head discharge of a channel
C. Duty of canal water at the head of a channel and at the outlet of a distributary, differ considerably due to progressive losses of water
D. Duty of canal water at the outlet of a distributary, is generally known as outlet factor or outlet discharge factor
E. All the above.

9. The top of the capillary zone
Options
A. lies below the water table at every point
B. lies above the water table at every point
C. coincides the water table at every point
D. none of these.

10. The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m² to 50 tonnes/m², the coefficient of compressibility is
Options
A. 0.01
B. 0.02
C. 0.05
D. 0.001

Comments

More in Civil Engineering: