logo

CuriousTab

CuriousTab

Discussion

Home ‣ Civil Engineering ‣ GATE Exam Questions Comments
  • Question

  • Delta (?) in cm. Duty (D) in hectare Cumec and Base period (B) in days are related as


  • Options
  • A. ? = 864 B/D
  • B. B = 864 D/?
  • C. B = 864 ?/D
  • D. D = 8.64 B/?

  • Correct Answer
  • D = 8.64 B/? 

    • GATE Exam Questions problems

    Search Results

    • 1. An outlet irrigates an area of 20 ha. The discharge (l/s) required at this outlet to meet the evapotranspiration requirement of 20 mm occurring uniformly in 20 days neglecting other field losses is

    • Options
    • A. 2.52
    • B. 2.31
    • C. 2.01
    • D. 1.52
      • Discuss
    • 2. As per IS : 800-1984 the minimum pitch of rivets in a row is recommended as the diameter of the rivet times

    • Options
    • A. 2.0
    • B. 2.5
    • C. 3.0
    • D. 4.0
      • Discuss
    • 3. The dimensions for the flexural rigidity of a beam element in mass (M), length (L) and time (T) is given by

    • Options
    • A. MT-2
    • B. ML3T-2
    • C. ML-1T-2
    • D. M-1T2
      • Discuss
    • 4. If ? = nominal diameter of reinforcing bar, fs = compressive stress in the bar and fbd= design bond stress of concrete, the anchorage length, La of straight bar in compression is equal to :

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 5. The two criteria for the determination of allowable bearing capacity of a foundation are

    • Options
    • A. tensile failure and compression failure.
    • B. tensile failure and settlement.
    • C. bond failure and shear failure.
    • D. shear failure and settlement.
      • Discuss
    • 6. Well foundations are commonly used as foundations for the following structures :

    • Options
    • A. Water tanks
    • B. Bridges
    • C. Buildings
    • D. Reciprocating machines
      • Discuss
    • 7. The value of bearing capacity factor for cohesion, Nc, for piles as per Meyerhof, is taken as :

    • Options
    • A. 6.2
    • B. 12.0
    • C. 9.0
    • D. 5.14
      • Discuss
    • 8. In using the data from a plate bearing test for determining the modulus of subgrade reaction, the value of settlement to be used is :

    • Options
    • A. 1.25 mm
    • B. 2.50 mm
    • C. 3.75 mm
    • D. 1.75 mm
      • Discuss
    • 9. A cantilever beam of span 'L' is loaded with a concentrated load 'P' at the free end. Deflection of the beam at the free end is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 10. The maximum tensile stress at the section X-X shown in the figure below is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.