Discussion
Home ‣ Civil Engineering ‣ GATE Exam Questions Comments
- Question
The dimensions for the flexural rigidity of a beam element in mass (M), length (L) and time (T) is given by
Options- A. MT-2
- B. ML3T-2
- C. ML-1T-2
- D. M-1T2
- Correct Answer
- M-1T2
- 1. If ? = nominal diameter of reinforcing bar, fs = compressive stress in the bar and fbd= design bond stress of concrete, the anchorage length, La of straight bar in compression is equal to :
Options- A.
- B.
- C.
- D.
Discuss
- 2. The two criteria for the determination of allowable bearing capacity of a foundation are
Options- A. tensile failure and compression failure.
- B. tensile failure and settlement.
- C. bond failure and shear failure.
- D. shear failure and settlement. Discuss
- 3. Two flow patterns are represented by their stream functions ?1 and ?2 as given below:
?1 = x2 + y2, ?2 = 2xy
If these two patterns are superimposed on one another, the resulting streamline pattern can be represented by one of the following :
Options- A. A family of parallel straight lines
- B. A family of circles
- C. A family of parabolas
- D. A family of hyperbolas Discuss
- 4. An inverted siphon is a
Options- A. device for distributing septic tank effluent to a soil absorption system
- B. device for preventing overflow from elevated water storage tank
- C. device for preventing crown corrosion of sewer
- D. section of sewer which is dropped below the hydraulic grade line in order to avoid an obstacle. Discuss
- 5. Width of carriage way for a single lane is recommended to be
Options- A. 7.5 m
- B. 7.0 m
- C. 3.75 m
- D. 5.5 m Discuss
- 6. As per IS : 800-1984 the minimum pitch of rivets in a row is recommended as the diameter of the rivet times
Options- A. 2.0
- B. 2.5
- C. 3.0
- D. 4.0 Discuss
- 7. An outlet irrigates an area of 20 ha. The discharge (l/s) required at this outlet to meet the evapotranspiration requirement of 20 mm occurring uniformly in 20 days neglecting other field losses is
Options- A. 2.52
- B. 2.31
- C. 2.01
- D. 1.52 Discuss
- 8. Delta (?) in cm. Duty (D) in hectare Cumec and Base period (B) in days are related as
Options- A. ? = 864 B/D
- B. B = 864 D/?
- C. B = 864 ?/D
- D. D = 8.64 B/? Discuss
- 9. Well foundations are commonly used as foundations for the following structures :
Options- A. Water tanks
- B. Bridges
- C. Buildings
- D. Reciprocating machines Discuss
- 10. The value of bearing capacity factor for cohesion, Nc, for piles as per Meyerhof, is taken as :
Options- A. 6.2
- B. 12.0
- C. 9.0
- D. 5.14 Discuss
GATE Exam Questions problems
Search Results
Correct Answer:
Correct Answer: shear failure and settlement.
Correct Answer: A family of circles
Correct Answer: section of sewer which is dropped below the hydraulic grade line in order to avoid an obstacle.
Correct Answer: 3.75 m
Correct Answer: 2.5
Correct Answer: 2.31
Correct Answer: D = 8.64 B/?
Correct Answer: Bridges
Correct Answer: 5.14
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.