logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering GATE Exam Questions Comments

  • Question
  • Excessive fluoride in drinking water causes


  • Options
  • A. Alzheimer's disease
  • B. Mottling of teeth and embrittlement of bones
  • C. Methemoglobinemia
  • D. Skin cancer

  • Correct Answer
  • Mottling of teeth and embrittlement of bones 


  • GATE Exam Questions problems


    Search Results


    • 1. The removal of dissolved organic matter occurs in

    • Options
    • A. slow sand filters
    • B. trickling filters
    • C. rapid sand filters
    • D. dual media filters
    • Discuss
    • 2. The proposed dam shown in the below figure is 90 m long and coefficient of permeability of the soil is 0.0013 mm/second. The quantity of water (m3) that will be lost per day, by seepage is (rounded to the nearest number):

    • Options
    • A. 55
    • B. 57
    • C. 59
    • D. 61
    • Discuss
    • 3. The value of the camber recommended for cement concrete roads in areas of heavy rainfall is :

    • Options
    • A. 1 in 25
    • B. 1 in 33
    • C. 1 in 40
    • D. 1 in 50
    • Discuss
    • 4. The Bowen ratio is defined as :

    • Options
    • A. Ratio of heat and vapour diffusivities.
    • B. Proportionality constant between vapour heat flux and sensible heat flux.
    • C. Ratio of actual evapotranspiration and potential evapotranspiration.
    • D. Proportionality constant between heat energy used up in evaporation and the bulk radiation from a water body.
    • Discuss
    • 5. For the strip footing on a saturated clay, for the given failure surface as shown in the below figure, the bearing capacity equation takes the form : (where Cu - undrained shear strength ?u - angle of internal friction B - width of strip footing qc - ultimate bearing capacity of soil)

    • Options
    • A. 5.7 Cu
    • B. 5.14 Cu
    • C. 4? Cu
    • D. 2? Cu
    • Discuss
    • 6. A 1 : 30 model of an ogee spillway crest records an acceleration of 1.3 m/s2 at a certain location. The homologous value of the acceleration in the prototype in m/s2 , is

    • Options
    • A. 0.043
    • B. 0.237
    • C. 1.300
    • D. 7.120
    • Discuss
    • 7. A reinforced concrete wall carrying vertical loads is generally designed as per recommendations given for columns. The ratio of minimum reinforcements in the vertical and horizontal directions is

    • Options
    • A. 2 : 1
    • B. 5 : 3
    • C. 1 : 1
    • D. 3 : 5
    • Discuss
    • 8. The degree of static indeterminacy of the rigid frame having two internal hinges as shown in the figure below, is

    • Options
    • A. 8
    • B. 7
    • C. 6
    • D. 5
    • Discuss
    • 9. Water flows at a depth of 0.1 m with a velocity of 6 m/s in a rectangular channel. The alternate dpeth is

    • Options
    • A. 0.30 m
    • B. 0.40 m
    • C. 0.86 m
    • D. 0.81 m
    • Discuss
    • 10. The shape of the STOP sign according to IRC:67-2001 is

    • Options
    • A. circular
    • B. triangular
    • C. octagonal
    • D. rectangular
    • Discuss


    Comments

    There are no comments.

Enter a new Comment