logo

CuriousTab

CuriousTab

Discussion

Home ‣ Civil Engineering ‣ Structural Design Specifications Comments
  • Question

  • The thickness 't' of a rectangular column base which is provided for distributing the load uniformly, is calculated from the formula


  • Options
  • A. The thickness 't' of a rectangular column base which is provided for distributing the load uniformly
  • B. The thickness 't' of a rectangular column base which is provided for distributing the load uniformly
  • C. The thickness 't' of a rectangular column base which is provided for distributing the load uniformly
  • D. The thickness 't' of a rectangular column base which is provided for distributing the load uniformly

  • Correct Answer
  •  

    • Structural Design Specifications problems

    Search Results

    • 1. The minimum area of cross section of reinforcement in either direction of a slab should not be less than ...... of the slab cross section

    • Options
    • A. 0.75%
    • B. 0.10%
    • C. 0.15%
    • D. 0.20%
      • Discuss
    • 2. If fck is characteristic compressive strength of concrete, the flexural and split tensile strength fcr = afck N/mm2 where the value of a is

    • Options
    • A. 0.4
    • B. 0.5
    • C. 0.6
    • D. 0.7
    • E. 0.8
      • Discuss
    • 3. The angle of inclination of the lacing bars with axis of the member is kept between

    • Options
    • A. 20° and 50°
    • B. 30° and 60°
    • C. 40° and 70°
    • D. 50° and 80°
      • Discuss
    • 4. For spans upto 10 m, the safe span to depth ratio for

    • Options
    • A. cantilever is 7
    • B. simply supported beams is 20
    • C. continuous beams is 26
    • D. all the above.
      • Discuss
    • 5. For all practical purposes, the modulus of elasticity of steel is assumed

    • Options
    • A. 200 kN/mm2
    • B. 225 kN/mm2
    • C. 250 kN/mm2
    • D. 275 kN/mm2
      • Discuss
    • 6. For calculating critical compression stress in bending Cs for sections symmetrical about the x-x axis, from the formula , the value of G is taken

    • Options
    • A. 0.2 E
    • B. 0.3 E
    • C. 0.4 E
    • D. 0.5 E
      • Discuss
    • 7. The minimum diameter of longitudinal reinforcement of a column should not be less than

    • Options
    • A. 6 mm
    • B. 8 mm
    • C. 10 mm
    • D. 12 mm
    • E. 20 mm
      • Discuss
    • 8. The grade of reinforced concrete to be used in sea water or structures exposed to sea water should be

    • Options
    • A. M 10
    • B. M 15
    • C. M 20
    • D. M 30
      • Discuss
    • 9. If fck is the characteristic cube strength of concrete in N/mm2, the modulus of elasticity of structural concrete Ec = afck where the value of a, is

    • Options
    • A. 5900
    • B. 5800
    • C. 5700
    • D. 5600
    • E. 5500
      • Discuss
    • 10. Generally acceptable nominal size of aggregates for reinforced concrete, is

    • Options
    • A. 10 mm
    • B. 15 mm
    • C. 20 mm
    • D. 25 mm
    • E. 40 mm
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.