Set-back distance is the distance between road land boundary and building line r

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ Highway Engineering Comments

Question
Set-back distance is the distance between
Options
A. road land boundary and building line
B. road land boundary and control line
C. building line and control line
D. road land boundary and control line.

Correct Answer

road land boundary and building line

Highway Engineering problems

Search Results

3. Pick up the correct statement from the following:
Options
A. The corss fall of the shoulder should be at least 0.5% steeper than camber
B. On superelevated sections, the shoulders should be provided a cross fall equal to camber
C. Earthern roads in general are provided steepest crossfall
D. All the above.

4. The width of pavement in addition to a gravelled berm 1 m on either side for a two directional traffic recommended by Nagpur Conference of Chief Engineers, is
Options
A. 4.7 m
B. 5.7 m
C. 6.7 m
D. 7.7 m
E. 8.7 m

6. Over taking time required for a vehicle with design speed 50 km ph and overtaking acceleration 1.25 m/sec² to overtake a vehicle moving at a speed 30 km ph, is
Options
A. 5.0 secs
B. 6.12 secs
C. 225.48 secs
D. 30 secs

9. Full amount of extra width of a pavement on the curve, is provided at
Options
A. beginning of the transition curve
B. centre of the transition curve
C. beginning of the circular curve
D. centre of the circular curve.

Comments

More in Civil Engineering: