logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Highway Engineering Comments

  • Question
  • Along a hill road, a side drain is provided on


  • Options
  • A. outer side of a spur curve
  • B. outer side of a re-entrant curve
  • C. outer side of both (a) and (b)
  • D. inner side of both (a) and (b)

  • Correct Answer
  • inner side of both (a) and (b


  • Highway Engineering problems


    Search Results


    • 1. In welded wire mesh, the longitudinal wire is placed at

    • Options
    • A. 10 cm centres
    • B. 15 cm centres
    • C. 20 cm centres
    • D. 25 cm centres
    • E. 30 cm centres
    • Discuss
    • 2. Thickness of broken centre line markings for a four lane road, is generally kept

    • Options
    • A. 10 cm
    • B. 12 cm
    • C. 15 cm
    • D. 18 cm
    • E. 20 cm
    • Discuss
    • 3. The minimum cross fall of shoulders is kept

    • Options
    • A. 0.5%
    • B. 1.0%
    • C. 1.5%
    • D. 2.5%
    • E. 3%
    • Discuss
    • 4. Pick up the incorrect statement from the following. On highways circular curves may be

    • Options
    • A. simple curves
    • B. compound curves
    • C. reverse curves
    • D. vertical curves
    • E. all the above.
    • Discuss
    • 5. The length of a transition curve, is governed by

    • Options
    • A. rate of change of radial acceleration
    • B. rate of change of super-elevation
    • C. both (a) and (b)
    • D. neither (a) nor (b)
    • Discuss
    • 6. Pick up the correct statement from the following:

    • Options
    • A. Borrow pits are located out side the right of way
    • B. Borrow pits may be located on either side of the right of way
    • C. Spoil bank is located on one side of the right of way
    • D. All the above.
    • Discuss
    • 7. Pick up the correct statement from the following:

    • Options
    • A. Various geometric design features and generally guided by ruling design speed
    • B. The design speed for a given highway should preferably be uniform
    • C. Abrupt change in the design speed should not be permitted
    • D. all the above.
    • Discuss
    • 8. Horizontal curves on highways are provided

    • Options
    • A. to break the monotony of driving
    • B. to discourage the tendency to increase speed
    • C. to decrease the mental strain on drivers
    • D. all the above.
    • Discuss
    • 9. If the difference in elevation of an edge of the pavement 9 m wide and its crown is 15 cm, the camber of the pavement, is

    • Options
    • A. 1 in 60
    • B. 1 in 45
    • C. 1 in 30
    • D. 1 in 15
    • E. 1 in 7.5
    • Discuss
    • 10. Gradient resistance of moving vehicles along down slopes, is

    • Options
    • A. + 7 kg/tonne
    • B. + 9 kg/tonne
    • C. - 9 kg/tonne
    • D. - 7 kg/tonne
    • Discuss


    Comments

    There are no comments.

Enter a new Comment