Discussion
Home ‣ Civil Engineering ‣ Highway Engineering Comments
- Question
If R is the radius of a main circular curve, ? is the angle of deflection and ? is the polar deflection angle of any point, its radial distance is
Options- A. 3 R sin ?/3 sin 2?
- B. 3 R sin ?/2 sin 3?
- C. 3 R sin ?/3 sin ?/2
- D. 3 R sin 2? sin ?
- Correct Answer
- 3 R sin ?/3 sin 2?
- 1. Concrete pavement is provided if daily traffic per lane exceeds
Options- A. 500 tonnes
- B. 750 tonnes
- C. 1000 tonnes
- D. 1250 tonnes
- E. 1300 tonnes Discuss
- 2. If the elevations along a road increase, the slope of the road along the longitudinal direction, is known as
Options- A. gradient
- B. grade
- C. positive grade
- D. negative grade. Discuss
- 3. Reference pillars fixed on the centre line of a proposed road, provide the following information:
Options- A. reduced distance (R.D.)
- B. horizontal distance of road from the centre line
- C. reduced level at the top of pillar
- D. formation level of the road
- E. all the above. Discuss
- 4. Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are
Options- A. 5.0
- B. 6.5
- C. 7.0
- D. 7.5
- E. 8.0 Discuss
- 5. If V is the velocity in km.p.h., t the brake reaction time in seconds and ? the efficiency of the brakes, the stopping distance S of the vehicle, is
Options- A.
- B.
- C.
- D.
Discuss
- 6. Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement
Options- A. 10 cm high
- B. 25 cm high
- C. 50 cm high
- D. 100 cm high
- E. 150 cm high Discuss
- 7. According to Indian Road Congress, the width of carriageway, is
Options- A. 3.75 m for single lane
- B. 7.0 m for two lanes without raised kerbs
- C. 7.5 m for two lanes with raised kerbs
- D. 10.5 m for three lanes pavements
- E. All the above Discuss
- 8. The minimum superelevation in rolling terrain in plains, is limited to
Options- A. 4%
- B. 5%
- C. 6%
- D. 7%
- E. 10% Discuss
- 9. The maximum comfortable retardation applied to moving vehicles, is
Options- A. 3.42 m/sec2
- B. 4.42 m/sec2
- C. 5.56 m/sec2
- D. 7.80 m/sec2
- E. 10 m/sec2 Discuss
- 10. An ideal vertical curve is
Options- A. true spiral
- B. cubic spiral
- C. cubic parabala
- D. lamniscate
- E. none of these. Discuss
Highway Engineering problems
Search Results
Correct Answer: 1000 tonnes
Correct Answer: gradient
Correct Answer: all the above.
Correct Answer: 6.5
Correct Answer:
Correct Answer: 10 cm high
Correct Answer: All the above
Correct Answer: 7%
Correct Answer: 3.42 m/sec2
Correct Answer: none of these.
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.