Discussion
Home ‣ Civil Engineering ‣ Highway Engineering Comments
- Question
Alignment of highways in hilly regions, is decided on
Options- A. long stretch of very hard cutting
- B. number of river crossings
- C. natural unstable areas
- D. saddles or passes
- E. all the above.
- Correct Answer
- all the above.
- 1. To prevent compressive stresses in a rigid concrete pavement, the joint prvoided, is
Options- A. expansion joint
- B. contraction joint
- C. hinged joint
- D. all the above. Discuss
- 2. On earth roads, the camber should preferably be
Options- A. 1 in 20 to 1 in 24
- B. 1 in 30 to 1 in 48
- C. 1 in 15 to 1 in 20
- D. 1 in 10 to 1 in 15
- E. 1 in 10 to 1 in 12 Discuss
- 3. The standard equation of a cubical spiral transition curve provided on roads, is
Options- A.
- B.
- C.
- D.
- E. none of these. Discuss
- 4. The convexity provided to the carriageway between the crown and edge of the pavement, is known as
Options- A. super-elevation
- B. camber
- C. height of the pavement
- D. None of these. Discuss
- 5. The radius of curvature provided along a transition curve, is
Options- A. minimum at the beginning
- B. same throughout its length
- C. equal to the radius of circular curve
- D. varying from infinity to the radius of circular curve. Discuss
- 6. Pick up the incorrect statement from the following:
Options- A. Highways are always constructed in straight line
- B. Highways may be provided horizontal curves
- C. Highways may be provided vertical curves
- D. Highways may be provided both horizontal and vertical curves. Discuss
- 7. Setting out of Lemniscate transition curves, is done with
Options- A. perpendicular offsets
- B. radial offsets
- C. deflection angles
- D. polar deflection angles. Discuss
- 8. Super-elevation on roads in snow bound areas, should generally not exceed
Options- A. 15%
- B. 12%
- C. 10%
- D. 7%
- E. 6% Discuss
- 9. If L is the length of the transition curves provided on either side of a circular curve of radius R, the maximum angle of deflection with tangent for the junctions of the transition curve and circular curve, is
Options- A. L/R
- B. L/2R
- C. L/3R
- D. L/4R
- E. none of these. Discuss
- 10. Indian Road Congress (I.R.C.) was founded and constituted with its head quarters at New Delhi, in
Options- A. 1924
- B. 1927
- C. 1930
- D. 1934
- E. 1942 Discuss
Highway Engineering problems
Search Results
Correct Answer: all the above.
Correct Answer: 1 in 20 to 1 in 24
Correct Answer:
Correct Answer: camber
Correct Answer: varying from infinity to the radius of circular curve.
Correct Answer: Highways are always constructed in straight line
Correct Answer: polar deflection angles.
Correct Answer: 7%
Correct Answer: none of these.
Correct Answer: 1934
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.