logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Highway Engineering Comments

  • Question
  • An Executive Engineer of roads, executes works under direct control of


  • Options
  • A. Superintending Engineer
  • B. Secretary to the Govt
  • C. Chief Engineer
  • D. None of these.

  • Correct Answer
  • Superintending Engineer 


  • Highway Engineering problems


    Search Results


    • 1. The desirable camber for straight roads with thin bituminous surfacing, is

    • Options
    • A. 1 in 33 to 1 in 25
    • B. 1 in 40 to 1 in 33
    • C. 1 in 150 to 1 in 140
    • D. 1 in 160 to 1 in 140
    • E. none of these.
    • Discuss
    • 2. Minimum thickness of the base of a flexible pavement, is

    • Options
    • A. 10 cm
    • B. 15 cm
    • C. 20 cm
    • D. 25 cm
    • E. 30 cm.
    • Discuss
    • 3. When an up gradient of a highway meets a downgrade, the vertical curve provided, is known as

    • Options
    • A. valley curve
    • B. sag curve
    • C. summit curve
    • D. all the above.
    • Discuss
    • 4. If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is

    • Options
    • A. 32.44 km/hour
    • B. 42.44 kg/hour
    • C. 52.44 km/hour
    • D. 62.44 km/hour
    • E. 72.44 km/hour
    • Discuss
    • 5. Intermediate catch water drains are provided only, if

    • Options
    • A. catchment area of the watershed above road is large
    • B. intensity of rainfall is heavy
    • C. single catch water drain is inadequate
    • D. all the above.
    • Discuss
    • 6. Normal formation width of a hill road for one-way traffic, is

    • Options
    • A. 3.6 m
    • B. 4.8 m
    • C. 6.6 m
    • D. 7.2 m
    • E. 8 m
    • Discuss
    • 7. Raising of outer edge of a road with respect to inner edge, is known

    • Options
    • A. super elevation
    • B. cant
    • C. banking
    • D. all the above.
    • Discuss
    • 8. From the point of tangency before an intersection, the route markers are fixed at a distance of

    • Options
    • A. 15 m to 30 m
    • B. 20 m to 35 m
    • C. 40 m to 50 m
    • D. 50 m to 75 m
    • E. 100 m to 150
    • Discuss
    • 9. If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super-elevation

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 10. The inventor of road making as a building science, was

    • Options
    • A. Sully
    • B. Tresguet
    • C. Telford
    • D. Macadam.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment