According to IRC : 52-1973, for a single lane National Highway in hilly region,

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ Highway Engineering Comments

Question
According to IRC : 52-1973, for a single lane National Highway in hilly region,
Options
A. width of the carriageway must be 3.75 m
B. shoulders on either side must be 1.25 m
C. total width of the road-way must be 6.25 m
D. total of the above.

Correct Answer

total of the above.

Highway Engineering problems

Search Results

2. Pick up the incorrect statement from the following:
Options
A. Tresguet did not provide the top camber for the drainage of surface water
B. Tresguet provided the top camber for the drainage of surface water
C. Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides
D. Macadam provided a camber to the formation at the dug-up state, to drain percolated water.

3. For night travel, the length of a valley curve should be such that the head light beam distance is the same as
Options
A. stopping sight distance
B. overtaking sight distance
C. sum of (a) and (b)
D. difference of (a) and (b)

5. Any gradient on a road is said to be an exceptional gradient, if it is
Options
A. more than ruling gradient
B. less than average gradient
C. more than floating gradient
D. less than minimum gradient or more than maximum gradient.

6. Reinforcement in cement concrete slab of road pavements, is placed
Options
A. longitudinally
B. transversely
C. longitudinally and transversely
D. in the form of welded wire mesh
E. none of these.

7. Road width 8.8 m of two lane National highways or State highways in mountainous terrain
Options
A. excludes the width of parapet (0.6 m)
B. excludes the width of side drain (0.6 m)
C. excludes the width of parapet and side drain
D. includes the width of parapet and side drain

10. Reconnaissance is best done with the help of
Options
A. aerial photographic survey
B. condastral surveys
C. topographical surveys
D. triangulation surveys
E. none of these.

Comments

More in Civil Engineering: