logo

CuriousTab

CuriousTab

Discussion

Home ‣ Civil Engineering ‣ Steel Structure Design Comments
  • Question

  • Poisson's ratio for steel within elastic limit, ranges from


  • Options
  • A. 0.15 to 0.20
  • B. 0.25 to 0.24
  • C. 0.25 to 0.33
  • D. 0.33 to 0.35
  • E. 0.45 to 0.50

  • Correct Answer
  • 0.25 to 0.33 

    • Steel Structure Design problems

    Search Results

    • 1. When two plates are placed end to end and are joined by two cover plates, the joint is known as

    • Options
    • A. lap joint
    • B. butt joint
    • C. chain riveted lap joint
    • D. zig-zag riveted lap joint
    • E. double cover butt joint.
      • Discuss
    • 2. The spans are considered approximately equal if the longest span does not exceed the shortest span by more than

    • Options
    • A. 5%
    • B. 10%
    • C. 15%
    • D. 20%
      • Discuss
    • 3. The maximum axial load which is just sufficient to keep a column in a small deflected shape, is called

    • Options
    • A. crippling load
    • B. buckling load
    • C. critical load
    • D. all the above.
      • Discuss
    • 4. The most commonly used sections in lateral system to carry shear force in built up columns, are

    • Options
    • A. rolled steel flats
    • B. rolled angles
    • C. rolled channels
    • D. all the above.
      • Discuss
    • 5. An axial loaded column is supported on a slab base whose projection is 8 cm. If the intensity of pressure from concrete is 40 kg/cm2 and allowable bending stress in slab base is 1890 kg/cm2, the thickness (t) of the slab base, is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 6. If p and d are pitch and gross diameter of rivets, the efficiency (?) of the riveted joint, is given by

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
      • Discuss
    • 7. A long plate girder is subjected to a maximum bending moment M in which permitted allowable bending stress is fb. The economical depth de and the thickness of the web tw, is given by

    • Options
    • A.
    • B.
    • C.
    • D.
    • E. none of these.
      • Discuss
    • 8. For columns whose slenderness ratio is upto 160, the secant formula for the determination of allowable stress, is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 9. The safe working pressure for a spherical vessel 1.5 m diameter and having 1.5 cm thick wall not to exceed tensile stress 50kg/cm2 , is

    • Options
    • A. 16 kg/cm2
    • B. 18 kg/cm2
    • C. 20 kg/cm2
    • D. 22 kg/cm2
      • Discuss
    • 10. A riveted joint many experience

    • Options
    • A. tearing failure of plates
    • B. bearing failure of plates
    • C. splitting failure of plates at the edges
    • D. bearing failure of rivets
    • E. all the above.
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.