logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Steel Structure Design See What Others Are Saying!
  • Question
  • For double angles carrying tension, placed back to back and connected to either side of the gusset plate, the sectional area of the section, is equal to cross sectional area of


  • Options
  • A. the section
  • B. the section plus area of rivet holes
  • C. the section minus area of rivet holes
  • D. tthe section multiplied by the area of the rivet hole.

  • Correct Answer
  • the section minus area of rivet holes 


  • More questions

    • 1. The detention time of a circular tank of diameter d and water depth H, for receiving the sewage Q per hour, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 2. Newton's law of Collision of elastic bodies states that when two moving bodies collide each other, their velocity of separation

    • Options
    • A. is directly proportional to their velocity of approach
    • B. is inversely proportional to their velocity of approach
    • C. bears a constant ratio to their velocity of approach
    • D. is equal to the sum of their velocities of approach.
    • Discuss
    • 3. If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is

    • Options
    • A. 0.91
    • B. 0.92
    • C. 0.93
    • D. 0.94
    • E. 0.95
    • Discuss
    • 4. The brick work is measured in sq metre, in case of

    • Options
    • A. Honey comb brick work
    • B. Brick flat soling
    • C. Half brick walls or the partition
    • D. All the above.
    • Discuss
    • 5. Pick up the correct statement from the following :

    • Options
    • A. the roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads
    • B. the beams of multi-storeyed buildings rest on girders and are the main load transferring members to the columns
    • C. the slab is spanned across the secondary beams provided between the main beams
    • D. All of these.
    • Discuss
    • 6. Flocculated particles do not change their

    • Options
    • A. size
    • B. shape
    • C. weight
    • D. none of these.
    • Discuss
    • 7. Dispersion of load through the flange to web is considered as dispersed uniformly at an angle ?° is

    • Options
    • A. 10°
    • B. 15°
    • C. 20°
    • D. 25°
    • E. 30°
    • Discuss
    • 8. If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width

    • Options
    • A. R + T
    • B. T-R
    • C. R2 + T2
    • D. R-T
    • Discuss
    • 9. Pick up the correct statement from the following :

    • Options
    • A. The boning rod is used for checking the levels of the sewer inverts
    • B. Manhole covers are made circular for the convenience of the cleaning staff
    • C. A manhole is classified as deep manhole if its depth is more than 1.5 m
    • D. A manhole is classified as shallow manhole if its depth is. less than 0.9 m
    • E. All the above.
    • Discuss
    • 10. The threshold markings are

    • Options
    • A. 4 m wide
    • B. 1 m clear space between adjacents
    • C. 45 m in length
    • D. placed symmetrically on either side of the runway centre line
    • E. all the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment