logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Steel Structure Design Comments

  • Question
  • A compression member consisting of angle sections may be a


  • Options
  • A. continuous member
  • B. discontinuous single angle strut
  • C. discontinuous double angle strut
  • D. all the above.

  • Correct Answer
  • all the above. 


  • Steel Structure Design problems


    Search Results


    • 1. When a load is transferred through one surface to another surface in contact, the stress is known as

    • Options
    • A. tensile stress
    • B. compressive stress
    • C. shearing stress
    • D. working stress
    • E. none of these.
    • Discuss
    • 2. For a steel grillage footing to support two unequal column loads

    • Options
    • A. line of action of the resultant of two column loads, is made to coincide with the centre of gravity of the base of the footing
    • B. trapezoidal shape is used for the base footing
    • C. projections of beams on either side in lower tier are such that bending moments under columns are equal
    • D. bending moment under the columns are kept equal to the bending moment between to two columns
    • E. all the above.
    • Discuss
    • 3. The equivalent axial load is obtained from the fomula

    • Options
    • A.
    • B.
    • C.
    • D.
    • E. none of these.
    • Discuss
    • 4. The main assumption of the method of simple design of steel frame work, is :

    • Options
    • A. beams are simply supported
    • B. all connections of beams, girders and trusses are virtually flexible
    • C. members in compression are subjected to forces applied at appropriate eccentricities
    • D. all the above.
    • Discuss
    • 5. The strength of a riveted lap joint is equal to its

    • Options
    • A. shearing strength
    • B. bearing strength
    • C. tearing strength
    • D. least of (a), (b) and (c)
    • E. greatest of (a) (b) and (c).
    • Discuss
    • 6. The slenderness ratio of a column is zero when its length

    • Options
    • A. is zero
    • B. is equal to its radius of gyration
    • C. is supported on all sides throughout its length
    • D. is between the points of zero moments.
    • Discuss
    • 7. The beams supporting the steps of a stair are generally known as

    • Options
    • A. headers
    • B. trimmers
    • C. stringers
    • D. spandrel beams.
    • Discuss
    • 8. For steel members not exposed to weather, the thickness of steel should not be less than

    • Options
    • A. 4.5 mm
    • B. 6 mm
    • C. 8 mm
    • D. 10 mm
    • Discuss
    • 9. If f is the maximum allowable bending stress in a tension member whose radius of gyration is r and depth is 2y, the required cross sectional area A is given by

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 10. The main advantage of a steel member, is :

    • Options
    • A. its high strength
    • B. its gas and water tightness
    • C. its long service life
    • D. all the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment