Discussion
Home ‣ Civil Engineering ‣ Water Supply Engineering Comments
- Question
Air inlet valve in water mains, is generally provided at
Options- A. summit of the pipe
- B. upstream of sluice valve
- C. down stream of sluice valve
- D. valley of the pipe
- E. both (a) and (c) of above.
- Correct Answer
- both (a) and (c) of above.
- 1. The population of a city in 2000 is 50,000. The average increase in population over last 8 decades is 7500 and average incremental increase during 8 decades is 750. The population of the city based on incremental method, in the year 2020 will be
Options- A. 55,000
- B. 60,500
- C. 66,500
- D. 72,500
- E. 76,500 Discuss
- 2. In plain sedimentation tanks under normal conditions, impurities are removed upto
Options- A. 60%
- B. 70%
- C. 80%
- D. 90%. Discuss
- 3. The bed slope in slow sand filters, is generally kept
Options- A. 1 in 50
- B. 1 in 75
- C. 1 in 100
- D. 1 : 200 Discuss
- 4. The diameter of pipes in bath rooms and lavatories in domestic water supply, is
Options- A. 6 mm
- B. 12 mm
- C. 18 mm
- D. 24 mm. Discuss
- 5. Run off is the quantity of water which flows
Options- A. in sewer pipes
- B. due to leakage in pipes
- C. in rivers
- D. none of these. Discuss
- 6. Pick up the incorrect statement from the following :
Options- A. Iron salts produce heavy flocs and hence remove more suspended matter
- B. Iron salts remove hydrogen sulphides
- C. Iron salts can be used over a limited range of pH values
- D. Iron salts impart corrosiveness to water. Discuss
- 7. S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For discharge Q and coefficient of transmissibility T, the relationship, is
Options- A.
- B.
- C.
- D.
Discuss
- 8. Efficiency of removing bacterias from raw water by a slow sand filter, is
Options- A. 80% to 81%
- B. 85% to 86%
- C. 90% to 97%
- D. 98% to 99%. Discuss
- 9. De-chlorination is followed by
Options- A. post-chlorination
- B. pre-chlorination
- C. double-chlorination
- D. super-chlorination. Discuss
- 10. The duration of contact of chlorine with water before it is served to the first consumer, should be at least
Options- A. 10 to 15 minutes
- B. 15 to 20 minutes
- C. 20 to 30 minutes
- D. 30 to 40 minutes
- E. one hour. Discuss
Water Supply Engineering problems
Search Results
Correct Answer: 66,500
Correct Answer: 70%
Correct Answer: 1 in 100
Correct Answer: 12 mm
Correct Answer: in rivers
Correct Answer: Iron salts can be used over a limited range of pH values
Correct Answer:
Correct Answer: 98% to 99%.
Correct Answer: super-chlorination.
Correct Answer: 20 to 30 minutes
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.