logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Water Supply Engineering Comments

  • Question
  • In pumping stations, the type of joint generally used, is


  • Options
  • A. socket and spigot joint
  • B. flanged joint
  • C. expansion joint
  • D. dresser coupling joint
  • E. flexible joint.

  • Correct Answer
  • flanged joint 


  • Water Supply Engineering problems


    Search Results


    • 1. The efficiency of sedimentation tank does not depend upon

    • Options
    • A. depth of tank
    • B. length of tank
    • C. detention period
    • D. velocity of water.
    • Discuss
    • 2. The valves provided at low points of pipes to drain off water quickly under gravity, are called

    • Options
    • A. blow off valves
    • B. drain valves
    • C. sewer valves
    • D. all the above.
    • Discuss
    • 3. The ratio of maximum hourly consumption and average hourly consumption of the maximum day, is

    • Options
    • A. 1.2
    • B. 1.5
    • C. 1.8
    • D. 2.4
    • E. 2.7
    • Discuss
    • 4. For plain chlorination of water, the quantity of chlorine used, is

    • Options
    • A. 0.1 mg/litre
    • B. 0.2 mg/litre
    • C. 0.3 mg/litre
    • D. 0.4 mg/litre
    • E. 0.5 mg/litre.
    • Discuss
    • 5. 45 litres of water per person per day, is provided in

    • Options
    • A. office buildings
    • B. hotels
    • C. hostels
    • D. nurse's homes.
    • Discuss
    • 6. Distribution of wash water is provided in

    • Options
    • A. sedimentation tank
    • B. slow sand filter
    • C. rapid gravity filter
    • D. all the above.
    • Discuss
    • 7. Service connections to consumers houses, are generally provided with

    • Options
    • A. copper pipes
    • B. hume pipes
    • C. galvanised iron pipes
    • D. P.V.C. pipes
    • E. none of these.
    • Discuss
    • 8. Turbidity of water may be caused due to

    • Options
    • A. Suspended clay
    • B. Suspended silt
    • C. finely divided organic material
    • D. all the above.
    • Discuss
    • 9. For centrifugal pumps

    • Options
    • A. initial cost is low
    • B. limited space is required
    • C. the discharge obtained is steady and non-pulsating
    • D. all the above.
    • Discuss
    • 10. The cast iron pipes for water supply system are used for

    • Options
    • A. durability
    • B. strength
    • C. easy connection
    • D. low maintenance cost
    • E. all the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment