logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Advanced Surveying Comments

  • Question
  • The declination and right ascension of the sun are each equal to zero on


  • Options
  • A. March 21
  • B. June 21
  • C. September 21
  • D. December 22.

  • Correct Answer
  • March 21 


  • Advanced Surveying problems


    Search Results


    • 1. Pick up the correct statement from the following :

    • Options
    • A. the sun's right ascension increases for 0 h to 24 h when it returns to the First point of Aries
    • B. the maximum declination of the sun increases up to 23° N on about 21st June
    • C. the minimum declination of the sun is zero' on 22nd September
    • D. the maximum declination of the sun is about 23° S on 21st December
    • E. all the above.
    • Discuss
    • 2. The point at which sun's declination changes from north to south, is known as

    • Options
    • A. first point of Aeries
    • B. first point of Libra
    • C. vernal Equinox
    • D. autumnal Equinox
    • E. both (b) and (d) of the above.
    • Discuss
    • 3. Pick up the in-correct statement from the following :

    • Options
    • A. Apparent solar time is measured from the lower transit of the true sun
    • B. Mean solar time is measured from the lower transit of the mean sun
    • C. Sidereal time is measured from the lower transit of the first point of Aries
    • D. Sidereal time is measured from the upper transit of the first point of Aries.
    • Discuss
    • 4. For plane ground the scale of a vertical photograph will be same as that of a tiled photograph along the photo parallel through

    • Options
    • A. isocentre
    • B. plumb point
    • C. principal point
    • D. none of these.
    • Discuss
    • 5. The polaris remains below horizon at

    • Options
    • A. 10° N
    • B. 50° N Latitude
    • C. equator
    • D. 5° S latitude.
    • Discuss
    • 6. H is the flying height above mean ground level and f is the principal distance of a vertical photograph. The mean scale of the photographs is

    • Options
    • A. H . f
    • B.
    • C.
    • D. H + f
    • E. none of these.
    • Discuss
    • 7. From the principal point the horizon point lies on the principal line at a distance of

    • Options
    • A. f tan ?
    • B. f sin ?
    • C. f cot ?
    • D. f cos ?.
    • Discuss
    • 8. Struts are load carrying members of a frame structure which are subjected to

    • Options
    • A. axial tension loads
    • B. axial compressive loads
    • C. torsional loads
    • D. transverse loads.
    • Discuss
    • 9. The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 x 106 kg/cm2)

    • Options
    • A. 166 kg
    • B. 102 kg
    • C. 204 kg
    • D. 74 kg
    • Discuss
    • 10. The phenomenon of slow extension of materials having constant load, i.e. increasing with the time is called

    • Options
    • A. creeping
    • B. yielding
    • C. breaking
    • D. none of these.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment