Discussion
Home ‣ Civil Engineering ‣ Advanced Surveying Comments
- Question
The prime vertical passes through
Options- A. the east point of the horizon
- B. the west point of the horizon
- C. the zenith point of the observer
- D. the nadir point of horizon
- E. all the above.
- Correct Answer
- all the above.
- 1. Pick up the in-correct statement from the folowing :
Options- A. Correction for refraction is always negative
- B. Correction for parallax is always positive
- C. Correction for semi-diameter is always negative
- D. Correction for dip is always negative
- E. None of these. Discuss
- 2. The rate of change of parallax dp/dh with respect to change in h, may be expressed as
Options- A. fB/(H - h)
- B. fB/(H - h)2
- C. fB/(H + h)
- D. fB/(H + h)2. Discuss
- 3. The net ground area of a vertical photograph 20 cm x 20 cm on scale 1 : 10,000 having overlaps 60% and 30%, is
Options- A. 0.50 sq km
- B. 0.56 sq km
- C. 0.60 sq km
- D. 0.64 sq km. Discuss
- 4. The scale of a tilted photograph of focal length f, taken from an altitude H, along the plate parallel through plumb point, is
Options- A.
- B.
- C.
- D.
Discuss
- 5. The foot of the perpendicular on the picture plane through the optical centre of the camera lens, is known as
Options- A. isocentre
- B. principal point
- C. perspective centre
- D. plumb line. Discuss
- 6. The difference of parallax for a given difference in elevation is independent of
Options- A. focal length of the camera
- B. overall size of the photo graphs
- C. percentage of overlap
- D. all the above. Discuss
- 7. The point on the photograph where bisector between the vertical line through optical centre of the camera lens and the plate perpendicular meets, is known as
Options- A. principal point
- B. isocentre
- C. plumb point
- D. perspective centre. Discuss
- 8. The negative sign is assigned to
Options- A. reduction to mean sea level
- B. correction for horizontal alignment
- C. correction for slope
- D. correction for slope
- E. all the above. Discuss
- 9. The method of surveying by triangula-tion was first introduced by the Dutchman Snell in
Options- A. 1600
- B. 1615
- C. 1630
- D. 1650
- E. 1680. Discuss
- 10. The angular distance of a heavenly body from the equator, measured along its meridian, is called
Options- A. declination
- B. altitude
- C. zenith distance
- D. co-latitude. Discuss
Advanced Surveying problems
Search Results
Correct Answer: Correction for semi-diameter is always negative
Correct Answer: fB/(H - h)2
Correct Answer: 0.64 sq km.
Correct Answer:
Correct Answer: principal point
Correct Answer: all the above.
Correct Answer: isocentre
Correct Answer: all the above.
Correct Answer: 1615
Correct Answer: declination
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.