Discussion
Home ‣ Civil Engineering ‣ Concrete Technology Comments
- Question
In the method of voids for determination of the quantity of cement paste, it is assumed that
Options- A. Voids in coarse aggregates are filled by fine aggregates
- B. Voids in fine aggregates are filled by the cement paste
- C. Volume of fine aggregates is equal to total voids in coarse aggregates plus 10% extra
- D. Volume of cement paste required is equal to total volume of voids in fine aggregates plus 15% extra
- E. All the above.
- Correct Answer
- All the above.
- 1. An aggregate is known as cyclopean aggregate if its size is more than
Options- A. 4.75 mm
- B. 30 mm
- C. 60 mm
- D. 75 mm
- E. 90 mm. Discuss
- 2. An excess of flaky particles in concrete aggregates
Options- A. decreases the workability
- B. increases the quantity of water and sand
- C. affects the durability of concrete
- D. more than 15% are not desirable
- E. all the above. Discuss
- 3. Horizontal construction joints in concrete walls are generally provided at
Options- A. soffit level
- B. window sill level
- C. floor level
- D. all the above. Discuss
- 4. Pick up the correct statement from the following:
Options- A. Construction joints in columns are provided a few cm below the junction of beam
- B. Construction joints in columns are provided at the bottom haunching
- C. Construction joints in beams and slabs are provided within middel third
- D. Constructionjoints are generally provided in positions subjected to least shear force
- E. All the above. Discuss
- 5. Inert material of a cement concrete mix, is
Options- A. water
- B. cement
- C. aggregate
- D. none of these. Discuss
- 6. Curing of pavements, floors, roofs and slabs, is done by
Options- A. membrane method
- B. ponding method
- C. covering surface with bags
- D. sprinkling water method
- E. shading concrete method. Discuss
- 7. For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is
Options- A. 10 kg
- B. 12 kg
- C. 14 kg
- D. 16 kg
- E. 20 kg Discuss
- 8. The surface where two successive placements of concrete meet, is known as
Options- A. Contraction joint
- B. Expansion joint
- C. Construction joint
- D. both (a) and (b)
- E. both (6) and (c). Discuss
- 9. The minimum percentage of chemical ingredient of cement is that of
Options- A. magnesium oxide
- B. iron oxide
- C. alumina
- D. lime
- E. silica. Discuss
- 10. Concrete is unsuitable for compaction by a vibrator if it is
Options- A. dry
- B. earth moist
- C. semi-plastic
- D. plastic
- E. none of these. Discuss
Concrete Technology problems
Search Results
Correct Answer: 75 mm
Correct Answer: all the above.
Correct Answer: all the above.
Correct Answer: All the above.
Correct Answer: aggregate
Correct Answer: ponding method
Correct Answer: 14 kg
Correct Answer: Construction joint
Correct Answer: magnesium oxide
Correct Answer: plastic
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.