logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Concrete Technology Comments

  • Question
  • You are asked to construct a massive dam, the type of cement you will use, is


  • Options
  • A. ordinary Portland cement
  • B. rapid hardening cement
  • C. low heat cement
  • D. blast furnace slag cement
  • E. white cement.

  • Correct Answer
  • low heat cement 


  • Concrete Technology problems


    Search Results


    • 1. 1.S. Sieve Nos. 10 mm and 4.75 mm are geneally used for grading of

    • Options
    • A. coarse aggregates
    • B. fine aggregates
    • C. neither (a) nor (b)
    • D. both (a) and (b)
    • E. none of these.
    • Discuss
    • 2. Workability of concrete for a given water content is good if the aggregates, are

    • Options
    • A. rounded aggregate
    • B. irregular aggregate
    • C. angular aggregate
    • D. flaky aggregates.
    • Discuss
    • 3. For an ordinary Portland cement

    • Options
    • A. residual does not exceed 10% when sieved through IS Sieve No. 9
    • B. soundness varies from 5 to 10 mm
    • C. initial setting time is not less than 30 minutes
    • D. compressive stress after 7 days, is not less than 175 kg/cm2
    • E. all the above.
    • Discuss
    • 4. The datum temperature for maturity by Plowman, is

    • Options
    • A. 23°C
    • B. 0°
    • C. - 5.6°C
    • D. - 11.7°C
    • Discuss
    • 5. According to the recommendations of IS : 456-1978, the expansion joints

    • Options
    • A. are provided where plane changes abruptly
    • B. are provided to ensure minimum resistance
    • C. are supported on separate columns
    • D. do not carry reinforcement across them
    • E. all the above.
    • Discuss
    • 6. Pick up the correct statement from the following:

    • Options
    • A. According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight
    • B. According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky
    • C. According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous
    • D. All the above.
    • Discuss
    • 7. Ordinary concrete is not used for concrete grade

    • Options
    • A. M 100
    • B. M 150
    • C. M 200
    • D. M 250
    • E. M 400
    • Discuss
    • 8. Grading of sand causes great variation in

    • Options
    • A. workability of concrete
    • B. strength of concrete
    • C. durability of concrete
    • D. handing and placing of concrete
    • E. all the above.
    • Discuss
    • 9. Pick up the correct statement from the following:

    • Options
    • A. Segregation is necessary for a workable concrete
    • B. Consistency does not affect the workability of concrete
    • C. If the slump increases, workability decreases
    • D. If the concrete mix is dry, the slump is maximum
    • E. None of these.
    • Discuss
    • 10. Shrinkage in concrete can be reduced by using

    • Options
    • A. low water cement ratio
    • B. less cement in the concrete
    • C. proper concrete mix
    • D. presaturated aggregates
    • E. all the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment