logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Railways Comments

  • Question
  • Track construction involves preparation of


  • Options
  • A. subgrade
  • B. plate laying
  • C. ballasting
  • D. all the above.

  • Correct Answer
  • all the above. 


  • Railways problems


    Search Results


    • 1. Pick up the correct statement from the following:

    • Options
    • A. Length of tongue rail should be greater than rigid wheel base of vehicle
    • B. Stock rail should be longer than tongue rail
    • C. Length of stock rail ahead of the toe should be a minimum of 1.65 m
    • D. All the above.
    • Discuss
    • 2. Anti-creep anchors are fixed to rails by

    • Options
    • A. wedging
    • B. spring grip
    • C. clamping
    • D. all the above.
    • Discuss
    • 3. On Indian Railways, number of a crossing is defined as

    • Options
    • A. sine of angle of crossing
    • B. consine of angle of crossing
    • C. tangent of angle of crossing
    • D. contangent of angle of crossing.
    • Discuss
    • 4. In permanent way, ballast

    • Options
    • A. transfers load from sleepers to the formation
    • B. provides an elastic bed to the track
    • C. provides a drainage of track
    • D. all the above.
    • Discuss
    • 5. Cast iron sleeper, is

    • Options
    • A. pot sleeper
    • B. box sleeper
    • C. Duplex sleeper
    • D. plate sleeper
    • E. All the above.
    • Discuss
    • 6. Staggered rail joints are generally provided

    • Options
    • A. on curves
    • B. on tangents
    • C. on bridges
    • D. in tunnels.
    • Discuss
    • 7. Rail section is generally designated by its

    • Options
    • A. total weight
    • B. total length
    • C. weight per metre length
    • D. area of its cross-section.
    • Discuss
    • 8. Smitch diamond is provided if the angle of diamond is less than

    • Options
    • A. 2°
    • B. 4°
    • C. 6°
    • D. 8°
    • Discuss
    • 9. The check rails are placed opposite the crossing so that

    • Options
    • A. it is symmetrically placed opposite nose of crossing
    • B. its one-third length is ahead of the nose of crossing
    • C. its two-third length is ahead of the nose of crossing
    • D. its three fourth length is ahead of the nose of crossing.
    • Discuss
    • 10. Widening of gauge is provided if degree of the curve, is

    • Options
    • A. 3° or less
    • B. 3° to
    • C. more than
    • D. none of these.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment